High accuracy and sensitivity.Simple zero and span adjustment. Feedback Signal (Option). Analog PID Control. Tubeless connection of YT-200, Air Regulator. Explosion Proof. No effect from mounting orientation.
OPT-700 –Serial to Fiber Optic Converter;Works directly in LC700/DFI backplane;Used in a stand-alone mode with an external power supply;Accepts EIA-232-C or EIA-485 with configurable baud rates;Supports Point-to-Point or Multidrop Fiber Optic communication.
0-20 mA, 4-20 mA or any within 0 and 20 mA. Reverse polarity protected.FOUNDATION Fieldbus on 31.25 kbit/s voltage mode;±0.03% of span for 4-20 mA, 0.005 mA for other spans;Bus powered: 9-32 Vdc;Quiescent 12 mA;
Device which converts the EIA-232-D to EIA-485 standard interfaces. Single module mounted on DIN rail;Signal conversion between EIA-232 and EIA-485 protocols;EIA-232 3-wire connection;Automatic EIA 485 driver enabling circuit for baud rate up to 250 Kbps;
Allows firmware updation into field devices;Compatible with Smar 302, 303 series, and DC302;- Powered by the computer;- Electrically isolated between the field device and the port EIA-232;- Easy and quick installation.