The 2250 series is built on the legacy of the Shark and 2200 controllers. Like its predecessors it is designed to be the most flexible, easy to use, and easy to see multi-parameter controller on the market.
Precise level measurement even in difficult media and operating conditions.Flex Hybrid Technology. For vessels from 50mm to 3m height. For metallic, non-metallic and pressurized tanks. Minimum product conductivity typically from 50 µS/cm. Protection class IP 69K for safety.
ATEX & IECEx CEII1G Exia IIC T6 Ta = -50 to +78°C & T5 Ta = -50 to +93°C & T4 Ta = -50 to +128°C Single or dual microswitch option Calibrated adjustment scale Black anodised aluminium switchcase to IP66 & IP67 standards Proven and documented SIL 2 IEC 61508 suitability.
Safe, simple and reliable way to measure fluid level inside a tank. These visual indicators are an alternative to sight glasses and provide a non-invasive, low maintenance, cost-effective level solution.
Used where controller is mounted remotely, up to 300’ from electrodes.Built-in sensitivity adjustment. Safe Low voltage at the electrodes. Custom electrode length and material available. Model LL7H for use with low conductivity liquids.
Monitor liquid inventory levels in almost all atmospheric storage applicationTop-mount configuration Micro-processor based platform Quick Disconnect Receptacles with optional Field Wiring Connectors Standard lengths from 15” to 72” adaptable to any existing vessel
Measures virtually any liquid product in any storage vessel.Accurate conversion of tank levels to inventory management data. Seamless interface of data to plantwide control system. Local display and host PLC that always agree.
Designed to monitor liquid level in a single vessel.Continuous, high-visibility indication of liquid level in vessel and of high and low setpoint status. Programmable for non-linear vessels. User-friendly interface allows field programming of product parameters.
Designed to work with any liquid media in the pharmaceutical industry.Conductivity independent. Available in zero dead leg configuration for lines as small as 3/4”. Fast reaction time. Complies with ASME BPE 2014.
Electronic sensors eliminate hard-to-install capillaries and solves temperature and position compensation issues:Dual transmitter output eliminates one transmitter and its associated process penetration. Operates on 24 Vdc power. Smaller diaphragm size.
For monitoring liquid inventory levels in virtually any atmospheric storage application.Top-mount configuration provides for easy installation without special fixturing or welding. Micro-processor based platform. Quick Disconnect Receptacles.
Rated for Process temperatures from 30°F (-1°C) to 200°F (94°C)Meets NEMA 4X requirementsFor applications exposed to wide temperature swings and repeated CIP cycles.New compressed elastomeric seal between the probe and Teflon® coating
Specifically designed for balance tank, CIP vessel, and other sanitary level control applications.Rugged reliability in the harshest applications and environments. Compact, ultra-sanitary package . Dual diaphragm architecture, fully potted electronics and a welded sealed stainless enclosure.
Suited for detection of water based (>25%) liquid media, excels in foamy or viscous applications.Conductivity independent+E52. Selectable sensitivity. Simple installation and connectivity. Fast reaction time.
Continuous level measurement in metallic vessels up to 10 ft (3 meters) in height.Ideal for adhesive and pasty media. Fixed fittings conform to 3-A 74-06 Sanitary Standard. Stainless steel Sensor. Product contacting materials compliant to FDA.