Featured Products
List of products by manufacturer Anderson Negele
TS Temperature Sensors (TSM & TSB)
Anderson Negele
Temperature Measurement in vessels and pipes.Single piece Tri-Clamp® - no adapter required. Product contact materials FDA compliant. All stainless steel construction.NSL-F Continuous Level Sensor
Anderson Negele
Precise level measurement even in difficult media and operating conditions.Flex Hybrid Technology. For vessels from 50mm to 3m height. For metallic, non-metallic and pressurized tanks. Minimum product conductivity typically from 50 µS/cm. Protection class IP 69K for safety.GB Differential Pressure Switch
Anderson Negele
Complies with all PMO, CFR and 3-A standardsSensor and range options for standard and high temp (UHT/Aseptic) applicationsDual 4-20mA retransmission standardAIC 200 Micro-based 1/4 DIN Single Loop Controller
Anderson Negele
Microprocessor based, single loop controllerInputs can include thermocouple, RTD, millivolt, volt, and milliamp. To control process including simple on-off to dual 4-20mA outputs with full PID. Provides a high level of accuracy with a measurement error limit of ± 0.25% of reading. .56 inch high LED’s to display process. Measurement error limit...ITM-4 4-Beam Turbidity Meter
Anderson Negele
Precision measurement of suspended solids through the use of infrared light3-A Compliant; Third party verified 4-20 mA plus switch output 4 Remote selectable ranges Ranges from 0-5 NTU to 0-5000 NTUAir Eliminator
Anderson Negele
Solves problems associated with air or gas presence in pumped liquids:Eliminates air from product for accurate meter operation. Positive pressure operation. Maintains consistent system flood volume. 3-A compliant.ITM-3 Relative Turbidity Monitor
Anderson Negele
· Designed for Dairy, Food and Beverage applications where turbidity monitoring is required316L stainless steel, sapphire glass and EPDM elastomersHM Turbine Flow meter for the sanitary food and dairy industry
Anderson Negele
Created specifically for the sanitary food and dairy industry.Durable stainless steel shaft and rulon sleeve bearing. All 316 stainless steel construction, including rotor. 3-A compliant.MPF Modular Pressure Transmitter
Anderson Negele
Modular sanitary pressure transmitterReplaceable components Diagnostic routines promote reliability, display verifies problem free operation Available HART communications Intuitive menu driven setupEM Life Sciences Series Pressure Gauge (90mm)
Anderson Negele
High-precision pressure gauges measuring accuracy up to ± 0.25 % of full scale value Individually adaptable to each application Pressure range -1...+40 bar (0...600 psig) Two-point adjustmentEK Life Sciences Series Pressure Gauge (63mm)
Anderson Negele
For Life Sciences applications requiring a smaller Gauge dial and a fractional sanitary fitting:-Mates directly on 3/4” and 1” lines Autoclaveable w/Standard CPM fitting Lowest profile of any “mini” gaugeEN Digital Pressure Gauge/Switch
Anderson Negele
For Applications in the Food, Beverage, and Dairy Industries. Developed to address customer requirements for improved performance, safety, and readability of pressure indicators.LA Life Sciences Series “Top Mount” Level Transmitter
Anderson Negele
Monitor liquid inventory levels in almost all atmospheric storage applicationTop-mount configuration Micro-processor based platform Quick Disconnect Receptacles with optional Field Wiring Connectors Standard lengths from 15” to 72” adaptable to any existing vesselLT Multi Channel Level Monitor
Anderson Negele
Measures virtually any liquid product in any storage vessel.Accurate conversion of tank levels to inventory management data. Seamless interface of data to plantwide control system. Local display and host PLC that always agree.GG Pulse 100 – Single Channel Level Monitor
Anderson Negele
Designed to monitor liquid level in a single vessel.Continuous, high-visibility indication of liquid level in vessel and of high and low setpoint status. Programmable for non-linear vessels. User-friendly interface allows field programming of product parameters.NCS31P Life Sciences Series Capacitive Point Level Switch
Anderson Negele
Designed to work with any liquid media in the pharmaceutical industry.Conductivity independent. Available in zero dead leg configuration for lines as small as 3/4”. Fast reaction time. Complies with ASME BPE 2014.TDL DP Level Transmitter for Pressure/Vacuum Vessels
Anderson Negele
Electronic sensors eliminate hard-to-install capillaries and solves temperature and position compensation issues:Dual transmitter output eliminates one transmitter and its associated process penetration. Operates on 24 Vdc power. Smaller diaphragm size.LD “Top Mount/Dipstick” Level Transmitter
Anderson Negele
For monitoring liquid inventory levels in virtually any atmospheric storage application.Top-mount configuration provides for easy installation without special fixturing or welding. Micro-processor based platform. Quick Disconnect Receptacles.LB/LL Conductive Point Level Sensors and Modules
Anderson Negele
Rated for Process temperatures from 30°F (-1°C) to 200°F (94°C)Meets NEMA 4X requirementsFor applications exposed to wide temperature swings and repeated CIP cycles.New compressed elastomeric seal between the probe and Teflon® coatingHB Control Grade Hydrostatic Level Transmitter
Anderson Negele
Specifically designed for balance tank, CIP vessel, and other sanitary level control applications.Rugged reliability in the harshest applications and environments. Compact, ultra-sanitary package . Dual diaphragm architecture, fully potted electronics and a welded sealed stainless enclosure.LS Capacitive Point Level Switch
Anderson Negele
Suited for detection of water based (>25%) liquid media, excels in foamy or viscous applications.Conductivity independent+E52. Selectable sensitivity. Simple installation and connectivity. Fast reaction time.NSL-M Compact Potentiometric Level Transmitter
Anderson Negele
Continuous level measurement in metallic vessels up to 10 ft (3 meters) in height.Ideal for adhesive and pasty media. Fixed fittings conform to 3-A 74-06 Sanitary Standard. Stainless steel Sensor. Product contacting materials compliant to FDA.LN “Rod Type” Potentiometric Level Transmitter
Anderson Negele
Accommodates lower conductivity fluids, exceptional for viscous products:-Exceptional long term stability. Unaffected by temperature changes. Fast reacting. Samples interior level at ten times per second allowing accurate readings.SL Inventory Grade Hydrostatic Level Transmitter
Anderson Negele
Measures liquid level in sanitary applications.Fewer tune-ups. No more overflows. More reliable inventories. 3-A compliant. Quick Disconnect Receptacles with optional Field Wiring Connectors.SX Life Sciences Series Hydrostatic Level Transmitter Level Sensor
Anderson Negele
For measuring liquid level in sanitary applications:Quick Disconnect, Receptacles with optional Field Wiring Connectors.One-Touch Field CalibrationL3 Pressure and Level Transmitter
Anderson Negele
Hygienic pressure and level monitoring for brewing, dairy, and food and beverage processing:High accuracy: <0.10 % . Integrated tank linearization and density compensation. Simple installation and operation. Product contact materials compliant to FDA.FH3/FH4 Digital Temperature Gauge
Anderson Negele
Ideal replacement for Mercury-InGlass thermometers:Designed for Retort Cookers. Operates on field replaceable batteries. Large Liquid Crystal Display for easy viewing. Field calibration capability available.FH Digital Temperature Gauge/Switch
Anderson Negele
For use in Dairy and Food processing.Cost-effective replacement for mechanical thermometer from bi-metals to mercury-in-glass. Large LCD display. For applications that require local indication and remote recording.SA/CT Modular RTD and Temperature Transmitter
Anderson Negele
All stainless steel design with modular components:Dual Output Options. Unique element-to-housing design. Quick Disconnect Options.SW/CT Life Sciences RTD and Temperature Transmitter
Anderson Negele
Modular components provide maximum configuration flexibility:Unique element-to-housing design eliminates exposed threads, lowers profile. Stainless steel construction with O-ring seals. NIST traceable with certifications.FJ Life Sciences Series Digital Temperature Gauge/Switch
Anderson Negele
Designed for Pharmaceutical and Biotech applicationsLarge Liquid Crystal Display Tamper-resistant back plate Field replaceable batteries Field calibration capabilityFD Digital Reference Thermometer
Anderson Negele
Only digital thermometer that complies with PMO Provisions.Digital display provides precise and accurate temperature indication. Sensors easily replaced without the need to recalibrate. Degree F/C is user selectable enabling global performance.
