Fluke 715 Volt/mA Calibrator

Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution. Measure voltage output process signals from PLCs, transmitters.

More details

New product
 
More info

Features at a Glance

  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
  • Measure voltage output process signals from PLCs, transmitters
  • Source or simulate 24 mA loop current
  • Source voltage to 100 mV or 10V
  • 24V loop supply with simultaneous current measurement
  • Enhanced voltage and current measure and source accuracy
  • Improved battery life
  • 250 ohm HART resistor with loop power
  • Holster features test lead storage
  • Compatible with toolpack magnetic hanging system
  • Step and linear ramp output function
  • Configurable zero and span settings
 
Specification
Functional specifications
Measure / Source mV
Range:  0 to 200 mV
Resolution:  0.01 mV
Accuracy:  0.015% + 2 counts
Measure / Source V
Range:  0 to 20 V
Resolution:  0.001 V
Accuracy:  0.01% + 2 counts
Measure / Source/ Simulate mA (% of span)
Range:  0 to 24 mA (-25% to 125%)
Resolution:  0.001 mA
Accuracy:  0.01% + 2 counts
 Note: Sink (simulate transmitter) Display mA or % of span

Specifications
Loop Power
Range:  24 V dc
Accuracy:  +/- 10%
 Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
Display
 Clear 5 digit LCD

Environmental Specifications
Operating Temperature
 -10ºC to 55ºC
Storage Temperature
 -40ºC to 60ºC
Humidity (Without Condensation)
 95% (10 ºC to 30 ºC)
 75% (30 ºC to 40 ºC)
 45% (40 ºC to 50 ºC)
 35% (50 ºC to 55 ºC)
Operating Altitude
 3,000m max

Safety Specifications
Safety
 CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications
Size
 187 mm L x 87mm W x 32 mm
 (7.93 in. L x 3.86 in. W x 2.06 in D)
Weight
 Approx. 330 g
 (21 oz)
Warranty
 3 years
Shock & Vibration
 Random, 2G, 5-500 Hz
 1m drop test
Battery type
 Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

21 other products in the same category: