Fluke Calibration P3000 Pneumatic Deadweight Testers

Provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) ;
0.015% of reading accuracy standard;
1-30 inHg vacuum (0.03-1 bar vacuum);
Selector valve converts unit from pressure to vacuum without the need to exchange pistons.

More details

New product
 
More info
These versatile instruments provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons. Units are manufactured to the highest standards with certified accuracies traceable to International Standards Laboratories such as the National Institute of Standards and Technology (NIST). These piston/cylinder type pneumatic standards provide excellent stability, repeatability and accuracy. An optional built-in hand pump can be added for both pressure and vacuum generation.  

Features:

  • 0.015% of reading accuracy standard (0.008% optional)
  • 1-30 inHg vacuum (0.03-1 bar vacuum)
  • 3-500 psi (0.2-35 bar) pressure
  • inH2O and mbar ranges available
  • Series 3 non-magnetic stainless steel weights
  • Units can be trimmed to local gravity FOC

Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.

 
Specification

Accuracy

Accuracy*±0.015% of reading (±0.008% optional)

*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.

Mass and PCU Materials of Construction

Standard weight materialSeries 3 non-magnetic austenitic stainless steel
Weight density7.8 g/cm³
Optional fractional weightsSolution heat treated aluminum
Weight density2.7 g/cm³
Models P3011, P3012, P3013, P3022, P3023, P3025 (V)Piston Material:                   Ceramic
Cylinder Material:                Martensitic steel
Coefficient of Expansion:     11 ppm/°C
Models P3014, P3015, P3025 (P) P3031, P3032 (P & V)Piston Material:                   Tungsten carbide
Cylinder Material:                Martensitic steel
Coefficient of Expansion:     16.5 ppm/°C

General

Test port adaptors1/8, 1/4, 3/8 and ½ NPT or BSP
Instrument weight24 lbs
Instrument size17.5 W x 12 D x 8.5 H
Mass set weight (typical)65 lbs

Minimum Standard Weight Increments

P3012, P3022 Pressure1 inH2O, (5 mbar)
P3013, P3023 Pressure2 inH2O, (10 mbar)
P3014, P3015, P3025 Pressure1 psi, (0.1bar)
P3016, P3031, P30321 psi, (0.1bar)
P3011, P3022, P3023, P3025 Vacuum0.2 inHg (10 mbar)

Optional Fractional Weights

P3014, P3015, P3025 Pressure0.1 psi (0.01 bar)

Built-in Hand Pumps

Pressure modeMax pressure 300 psi (20 bar)
Vacuum modeTo 90% vacuum

Operating Fluid for Liquid Lubricated Models

55-655mineral oil (standard)
Krytoxfor oxygen-safe applications (optional)

Options

PressCal SoftwareWindows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments.
KrytoxAs operating fluid for liquid lubricated gas operated models.

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

29 other products in the same category: