A pressure comparator supplies the same precisely controlled pressure to both a reference gauge and device under test for calibration. The P5510 is uniquely suited for your low pressure pneumatic calibration workload.
- Dual pressure/vacuum capability
- Bench mount design
- Built-in handpump as pressure/vacuum source
- High quality needle valve for fine control
- Test port adapters that require no PTFE tape or wrenches
- Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution
Make it a pressure calibrator (P5510-2700G)
The Fluke Calibration P5510 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5510 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.
For example, the P5510-2700G-3 is a P5510 Pressure Comparator, bundled together with 2700G-BG2M, 2700G-BG700K, 2700G-BG100K. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –15 psi to 300 psi (–100 kPa to 2 MPa).
The accuracy of the calibrator is equal to the accuracy of the 2700G Reference Pressure Gauge being used: ±0.02% full scale of positive pressure or ±0.05% of full scale for vacuum.