Q1 1/4 DIN Heat/Cool Temperature Controller

New product
 
More info

Features

  • Panel mount controller: 96 x 96 mm
  • 1 Configurable input
  • 1 optional auxiliary input
  • Up to 4 digital outputs
  • 1 optional analogue output
  • ON/OFF , PID single or double action withRS 485 ModBus RTU slave serial port
    • Start-up + Timer (optional)
    • Remote setpoint
    • 2 memorized setpoints
  • 2 Display lines:
    • 4 digits (PV) h: 12 mm
    • 4 digits (SP) h: 9 mm
    • Green colour
 
Specifications

Process inputs:

1 Universal input

- Thermocouples: L, J, T, K, S, R, B, N, E, Ni-NiMo, W3, W5
- RTD: Pt100
- Voltage (mV): 0/10...50 mV
- Current (mA): 0/4...20 mA
      (with 2.5 Ω shunt resistor)
- Custom linearisation and IR probes (J.K type)
Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)

Auxiliary input

- Voltage (V):  0/1...5 V, 0...10V(optional)
- Current (mA): 0/4...20 mA (optional)
- 1 current transformer input for load monitoring
      (optional) 50 or 100 mA jumper selectable

Keyboard

Mechanical: 4 multifunction keys

Process outputs

1 High level analogue output (optional):

- For PV retransmission
- Current (mA): 0/4...20 mA

Up to 4 Digital outputs:

OUT1/OUT2
- RELAY SPST-NO, 2A/250Vac
- TRIAC 1A 250 VAC
OUT3
- RELAY SPDT, 2A (250VAC)
OUT4
- RELAY SPST-NO, 2A/250Vac
- SSR Drive 0...5Vdc, ±20%, 30 mA Max

Power supply:

- 24VDC/VAC
- 100… 240 Vac (50/60 Hz)
Transmitter power supply: 24 Vdc ±20%, 30 mA Max

Functions

- ON/OFF control
- PID single action or double action (Heat/Cool)
- Start-up + Timer (optional)
- Remote setpoint
- 2 memorized setpoints

Autotuning

- Autotuning with natural frequency
- Autotuning with step response

Alarms

- Up to 3 configurable alarms

Communication and programming:

Interfaces

- RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)

Programming/configuration tools:

- Code selection
- Easy to use front interface for configuration
- Configuration software available for PC

Installation

Mounting method: panel mount
Case dimensions: 96 x 96 mm(1/4 DIN )

Connections

Signals connection
36 poles 5.5 mm² screw terminals block
Protection factor: IP 65 front protection

Display and indicators

2 Display lines:
      4 digits (PV) h: 12 mm
     4 digits (SP) h: 9 mm
green colour 8 status + 3 Alarm + 2 control output LEDs

Connectable to:

- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: