TLI40 Digital indicator

With universal or for potentiometer input

More details

New product
 
More info

Digital indicator with universal or potentiometer input, up to 4 relay or SSR drive outputs and RS485. Optional analogue signal retransmission output and a digital input

Features

  • Panel mount indicator 48 x 48
  • 1 temperature probe input
  • 1 digital input
  • Up to 4 outputs
  • Indication, acquisition and retransmission
  • RS 485 ModBus RTU slave serial port
  • 1 display 4 digits, h 12 mm, red colour
  • 3 LED Bargraph
 
Specifications

Process inputs:

1 temperature probe input

- Thermocouples:
      J, K, S, B, C, E, L, N, R, T
- PTC KTY81-121 (990 Ω @ 25 °C)
- NTC 103AT-2 (10KΩ @ 25 °C)
- RTD : PT100 IEC
- Voltage (V):  0/1...5 V, 0/2...10V
- Voltage (mV): 0...50 mV, 0/12...60mV
- Current (mA): 0/4...20 mA
      (with shunt resistor)
- Potentiometer: with value higher than 1 KΩ
- IR probes (J.K type)
Overall accuracy: ± 0,15 % fs
- Sampling time :
      from 8 to 64 samples/ second for V,C
      or potentiometer signals

1 digital input

- Free Voltage

Keyboard

Mechanical keyboard:
4 multifunction keys

Process outputs:

Up to 4 outputs according to the configuration

OUT1
- Relay SPST-NO 5 A-AC1 (2 AAC3/ 250 VAC)
- SSR servomotor drive  (14 VDC/7 mA)
- Analogue output: 0/4 ..20 mA or 0/2 ..10 V
OUT2 to OUT 4
- Relay SPST-NO 5 A-AC1 (2 AAC3/ 250 VAC)
- SSR servomotor drive  (14 VDC/7 mA)

Power supply:

- 24 VAC/VDC
- 100...240 VAC
Auxiliary power supply for external transmitters (optional):
- 12 VDC/20 mA max
- 2,5 VDC/2,5 mA max. for Potentiometers

Functions:

- Acquisition and retransmission
- Indication

Alarms

Up to 4 configurable alarms with the following  type:
- Probe errors
- Temperature tresholds: (absolute or relative)

Communication and programming:

Interfaces

Communication on TTL port to: 
- Universal programming key
- Remote display
- RS 485 serial interface
RS 485 port(optional)
with ModBus RTU and J-bus (slave) protocols

Programming/configuration tools:

- Easy to use front interface for configuration
- Configuration software available for PC

Installation:

Mounting method: panel mount
Case dimensions: 48 x 48 mm, D: 98 mm
(1/16 DIN )

Connections

Signals connection
- 2,5 mm² screw terminals block
- 2,5 mm² extractable screw terminals block
(optional )
- IP65 front frame protection, with gasket

Display and indicators

1 display 4 digits, h 12 mm, red colour
3 LED Bargraph

Connectable to:

- Programming key A01 for PC connection, backup and other functions
- Any controller from Ascon Tecnologic range with the appropriate I/Os
- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

4 other products in the same category: