Featured Products
T-150 Precision Frequency Calibrator
Martel BETAA simple to use frequency calibrator for the process control industry
New product
A simple to use frequency calibrator for the process control industry
The T-150 precision frequency calibrator can generate or read the frequencies ranging from 1 count per minute to 100 kHz allowing it to be used for a wide range of flow measuring instrumentation. Operation of this calibrator is made easy through the use of a sealed membrane keypad with simple controls. The outputs are set through the use of step and ramp keys which allows both large and small output changes to be made with ease.
When operated in source mode, the user can quickly step the output in 10% of range increments or make smaller changes using the scroll keys.
General Features
- High Accuracy
- Source and Read Capability
- Rugged, Dust Tight, Water Resistant Case
- Easy to Read Super-Twist LCD
- Intuitive Controls make operation easy even from infrequent users
- Powered by a common 9 volt battery
Specifications (1 year at 23 C 5; % of reading unless otherwise noted)
| Ranges with resolution: | 0-100 kHz, 0-1000.0 Hz, 0-1000.0 CPM |
| Accuracy: | ±0.01% FS ±1 LSD 18 C to 28 C |
| Max Load Driving: | 5 mA (1K Ohm load min) |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | -20°C to 60°C |
| Temperature Stability: | 0.005% FS/ °C 0°C to 18°C and 28°C to 50°C |
| Output Signal: | 5 V p-p square wave |
| Input Signal: | 1 V to 100 V p-p |
| Step Size: | 10% of range |
| Scroll Size: | 0.1% of range |
| Weight: | 12 oz. / 340 g |
| Size: | 5.7" x 3.2" x 1.4" (H x W x D) 14.5 cm x 8 cm x 3.6 cm |
