HM Turbine Flow meter for the sanitary food and dairy industry

HM Turbine Flow meter for the sanitary food and dairy industry

More details

New product
 
More info

Anderson-Negele’s HM-series turbine flow meter is the solution for applications requiring an economical, accurate flow meter. Using the proven method of counting the rotation of a turbine within a flowing stream of liquid, the “HM” turbine flow meter is not merely a modification of an industrial design, but a design that was created specifically for the sanitary food and dairy industry. Understanding these requirements has produced a flow meter with superior durability in the unique applications found in that industry. An all 316SS construction (including rotor) coupled with a unique two piece design which eliminates the need for internal locking rings to retain the meters internals makes for a truly cleanable, hygienic design that also provides exceptional performance. Non-magnetic sensing of the 316SS rotor eliminates the drag other magnetically sensed rotors experience which provides for better metering accuracy and greater longevity. The HM can handle aggressive products such as acids, vinegar solutions, brine, and de-ionized water.

Features

  • Durable stainless steel shaft and rulon sleeve bearing eliminates frequent rebuilding and reduces maintenance · All 316 stainless steel construction, including rotor
  • Two piece design allows for easy access to internals for inspection
  • 3-A compliant; Third party verified in accordance with standard 28-03

Applications

  • Water
  • Vinegar
  • Light Oils
  • Beer
  • Alcohols
  • Brine Solutions
  • Filtered Wine
  • De-ionized Water
  • CIP Solution
  • Clear Juices
 
Specifications/Spare Parts
Part No.
HM075SS00
Product Code
HM
Rotor
316 Stainless Steel Rotor
A
3.25 INCH
B
5.88 INCH
Fitting
1" T.C.
Accuracy
±0.5% of rate over specified range
Repeatability
±0.1% of rate
Operating Range
5-17 GPM (18.5-65 LPM)
Process Temperature Limits
32 - 300°F (0 - 149°C)
CIP/SIP Temperature Limits
300°F (149°C)
Ambient Temperature Limits for HTS1000
-40 - 175°F (-40 - 79°C)
Ambient Temperature Limits for HT75000
-65 - 225°F (-54 - 107°C)
Response Time
50 ms
Pressure Limits
150 psig(10.3 Bar) max.
Process Fluid Requirements
<100 cps viscosity, Particle size < 20 μm
Supply Voltage for HTS1000
8-24 VDC, 0.8 Watts maximum
Supply Voltage for HT75000
None
Outputs for HTS1000
7.3-23.3 VDC, Unscaled, Pulsed Output
Outputs for HT75000
0.18-2.6 V.P.P, Unscaled, AC Frequency Output
Electrical Connection
Cannon Sure-Seal connection
Process Connection
ASME sanitary clamp
Body Materials and Finishes
316L
Rotor Materials and Finishes
316L
Sleeve Bearing Materials and Finishes
Rulon® 123 (reinforced Polytetrafluoroethylene)
Adhesive Materials and Finishes
GSP1325-2 (Epoxy Resin)
Gasket Materials and Finishes
Silicone
Surface Finish
32 Ra max
Clamp Materials and Finishes
304 SS
Weight
4.2lb (1.9 kg)
Compliance/Protection
3-A compliant
Class
Warranty
1 year

Spare Parts

CABLE-3W-100 100' Cable With Connector
CABLE-3W-25 25' Cable With Connector
CABLE-3W-50 50' Cable With Connector
CABLE-3W-75 75' Cable With Connector
HM600-075SS 3/4" Rebuild Kit - 316Ss Rotor
HM600-100SS 1" Rebuild Kit - 316Ss Rotor
HM600-150SS 1.5" Rebuild Kit - 316Ss Rotor
HM600-200SS 2" Rebuild Kit - 316Ss Rotor
HSDT000 3-Wire Pick-Up Probe
HT75000 2-Wire Pick-Up Probe
HTS1000 3 Wire Pick-Up Probe

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: