HMP Life Sciences Turbine Flow Meter

For sanitary applications

More details

New product
 
More info

The “HMP” series turbine flow meter is suited for applications that require an economical and accurate measurement solution. The “HMP” is designed using the proven method of monitoring the rotation of a turbine rotor in a flowing product stream. This is not a modification of an industrial design but a flow meter designed specifically for sanitary applications. Understanding the requirements of these applications has produced a flow meter with superior durability. The all 316L SS construction (including rotor), along with a unique 2-piece housing design eliminates the need for internal locking rings to retain internal components. This makes for a truly cleanable design that also provides exceptional performance. When used with the HTS1000 probe, the non-magnetic sensing of the rotor eliminates drag – present in other magnetically sensed turbines. This lack of drag provides better accuracy and extended operational life. These features, coupled with a durable Rulon® bearing and stainless steel shaft, give the “HMP” the ability to handle difficult process requirements such as steam blowdowns and the need to autoclave without difficulty.

Features

  • Durable stainless steel shaft and Rulon® sleeve bearing eliminates failure due to blow downs
  • Two piece design allows for easy access to internals for inspection
  • Designed to ASME BPE-2004 standards
  • All 316L stainless steel construction
 
Specifications/Spare Parts
A
3.25 INCH
B
5.88 INCH
Fitting
1" T.C.
Accuracy
±0.5% of rate over specified range
Repeatability
±0.1% of rate
Operating Range
5-17 GPM (18.5-65 LPM)
Process Temperature Limits
32 - 300°F (0 - 149°C)
CIP/SIP Temperature Limits
300°F (149°C)
Ambient Temperature Limits for HTS1000
-40 - 175°F (-40 - 79°C)
Ambient Temperature Limits for HT75000
-65 - 225°F (-54 - 107°C)
Response Time
50 ms
Pressure Limits
150 psig(10.3 Bar) max.
Process Fluid Requirements
<100 cps viscosity, Particle size < 20 μm
Supply Voltage for HTS1000
8-24 VDC, 0.8 Watts maximum
Supply Voltage for HT75000
None
Outputs for HTS1000
7.3-23.3 VDC, Unscaled, Pulsed Output
Outputs for HT75000
0.18-2.6 V.P.P, Unscaled, AC Frequency Output
Electrical Connection
Cannon Sure-Seal connection
Process Connection
ASME sanitary clamp
Body Materials and Finishes
316L
Rotor Materials and Finishes
316L
Sleeve Bearing Materials and Finishes
Rulon® 123 (reinforced Polytetrafluoroethylene)
Adhesive Materials and Finishes
GSP1325-2 (Epoxy Resin)
Gasket Materials and Finishes
Silicone
Surface Finish
32 Ra max, SS surfaces electropolished
Clamp Materials and Finishes
304 SS
Weight
4.2lb (1.9 kg)
Compliance/Protection
3-A compliant
Class
USP Class VI, Designed to meet ASME BPE-2004 standards
Warranty
1 year

Spare Parts

HMP600-075 3/4" Rebuild Kit 316Ss Rotor
HMP600-100 1" Rebuild Kit 316Ss Rotor
HMP600-150 1.5" Rebuild Kit 316Ss Rotor
HMP600-200 2" Rebuild Kit 316Ss Rotor

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: