48 x 48 mm Controller

More details

New product
More info

The Fuzzy Logic plus PID microprocessor-based temperature controller, incorporate two bright, easy to read 4-digit LED displays, indicating process value and set point value. The Fuzzy Logic technology enables a process to reach a predetermined set point in the shortest time, with the minimum of overshoot during power-up or external load disturbance.

As a professional and experienced manufacturer, we supply high-performance and quality temperature controllers, which are also called temperature control, electronic temperature control, electronic temperature controller, and PID controller.


  • Full 4 digit display
  • Autotune PID.
  • Input user selectable.
  • 90-240 VAC supply.
  • Ramp rate function.
  • Timer function.
  • SEL function.
  • Optional 4-20 mA input.
  • 4-20 mA control output version.
  • Three level software access.
  • Safety :UL, CSA
  • EMC, LVD : CE

Thermocouple (T/C) type J, K, T, E, B, R, S, N.
RTD PT100 ohm RTD (DIN 43760/BS1904 or JIS)
Linear 4-20, 0-20mA, 0-10V, etc.
Range User configurable, refer to Table above.
Accuracy Refer to Table above
Cold Junction Compensation 0.1°C / °C ambient typical.
Sensor Break Protection Protection mode configurable.
External Resistance 100 ohms max.
Normal Mode Rejection 60dB
Common Mode Rejection 120dB
Sample Rate 5 times / second

Proportion Band 0-100% of SPAN
Rest (Integral) 0-3600 seconds
Rate (Derivative) 0-1000 seconds
Ramp Rate 0-2000°C / Hour (0-3600?F / Hour)
Dwell 0-3600 minutes
ON-OFF With adjustable hysterisis (0-20%of SPAN)
Cycle Time 0-120 seconds
Control Action Direct (for cooling) and reverse (for heating)

Process Display 0.4" green LED, 4 digits
Status Indicator Control out and alarm

Rating 90-240VAC,50/60Hz
Consumption Less than 5VA

Operating Temperature -10°C ~ 50°C
Humidity 0 to 90% RH (non-codensing)
Insulation 20M ohms min. (500VDC)
Breakdown AC2000V,50/60Hz,1 minute
Vibraton 10-55Hz,amplitude 1mm
Shock 200 m/s² (20g)
Weight 110 grams
Dimension 24(H)x48(W)x99mrn (depth behind panel)
Panel cutout 22 +0.5 x 45 +0.5 mm

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.


Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: