This analog controller is used for simple applications with on/off or P control, with digital display.
As a professional and experienced manufacturer, we supply high-performance and quality temperature controllers, which are also called temperature control, electronic temperature control, and electronic temperature controller.
- Build-in Laser Trim ASIC
- Easy to change range
- ON-OFFor time proportional selectable
- Compact, only 53mm in depth
- Wide selection of control output option
- Wide selection of ranges
- Safety : UL, CSA
- EMC, LVD : CE
Application: Plastic/rubber industry
It is installed on the heating material tube of the injection molding machine to control the temperature of the raw material, effectively control the liquid temperature of the plastic and improve the molding quality of the product.
Installed on the hot runner system for temperature control of runners and gates to stabilize the quality of the plastic.
Temperature control on the mold temperature machine, indirectly adjusting the temperature of the mold by adjusting the temperature of the hot fluid, can improve the production efficiency of the product and reduce the generation of defective products.
Electric heating furnace industry
Vacuum furnace equipment / vacuum melting / vacuum heat treatment
A new algorithm for PID adjustment using fuzzy rules is used to adjust the PID algorithm to eliminate the PID saturation integral phenomenon when the error is large. When the error is small, the improved PID algorithm is used for adjustment and can be automatically adjusted. Learn and memorize some of the characteristics of the controlled object to optimize the effect
The temperature control of the electric heating cloth package is often used for the heating of the exhaust pipe valve parts of the semiconductor factory, the panel factory, or the special steel cylinder.
In the semiconductor temperature process control program, the heating system of the chamber, such as the decane process, the dichloromethane process
Ceramic / kiln / glass industry
Ceramic sintering furnace:
The heating process on the sintering furnace controls the heating rate to obtain a finished product with better quality and stability
Temperature adjustment during kiln firing to obtain a finished product with better quality and stability.
control the temperature during dyeing to a suitable range, which in turn reduces chromatic aberration and improves the quality of dyed products.
The temperature during drying is controlled within a suitable range to improve the fiber product.
Constant temperature and humidity machine
Heating/cooling air conditioning
Pool/bathroom temperature control facility
|1 Power Input||BTC-402, BTC-401:|
3: 100-130VAC, 50Hz/60Hz / 200-240VAC, 50Hz/60Hz
|2 Signal Input||1: Type J thermocouple|
2: Type K thermocouple
3: PT 100 ohm DIN
4: PT 100 ohm JIS
|3 Range Code|
* Range K.L.M available for BTC-404 only
|Code||Range|| Code||Range||Selected Solder GAP|
|2||0 ~ 100°C||A||50 ~ 20°F||J3|
|3||0 ~ 200°C||B||50 ~ 40°F||J4|
|4||0 ~ 300°C||C||50 ~ 55°F||J5|
|5||0 ~ 400°C||D||50 ~ 750°F||J6|
|*||*||E||50 ~ 850°F||J7|
|6||0 ~ 600°C||F||50 ~ 1100°F||J8|
|7||0 ~ 800°C||G||50 ~ 1400°F||J9|
|8||0 ~ 1200°C||H||*0 ~ 2200°F||J10|
|4 Control Mode|
|2||P ( proportional)||Open|
|5 Output I||1: Relay, rated 5A/240VAC resistive|
2: Pulsed voltage to drive SSR, rated 20mA/24V
3: 4-20mA linear, max. load 500 ohms
4: 0-20mA linear, max. load 500 ohms
5: 0-10V linear, min. load 500k ohms
|6 Output II||0: None|
|7 Alarm||0: None|
1: Deviation alarm relay output, rated 2A/24OVAC max. resistive load
|8 Communication||0: None|
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.