UPort 1150

This converter used to connect RS232/RS422/RS485 devices to PC via USB port and then create virtual COM port in PC. This is very useful when COM ports are not available in PC.

More details

New product
 
More info

The families of Networking products cover GSM controller, wireless Ethernet converter (also called wireless Ethernet adapter, wireless Ethernet bridge, wireless Ethernet), Ethernet converter, RS-485 to RS-232 converter, and USB converter.

Features

  • Full-Speed USB operation at up to 12 Mbps
  • Additional I/O or IRQ not required
  • Serial transmission speed up to 921.6 Kbps
  • 64-byte FIFO and built-in hardware and software flow control
  • Built-in 15 KV ESD protection
  • Support for RS-422, 2-wire RS-485, and 4-wire RS-485 (UPort 1150)
  • Terminal block adaptor (UPort 1150)
  • 2 KV Optical Isolation Protection (UPort 1150I only)
 
Specification
USB  
Version 900/1800 MHz, dual band.
Connector USB type B
Speed 12 Mbps

Serial Interface  
No. of Ports 1
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 TxD+(B), TxD-(A), RxD+(B), RxD-(A),GND
RS-485 4-wire: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND 2-wire: Data+(B), Data-(A), GND
Connector Male DB9
FIFO 64 bytes
Serial line protection 15 KV ESD for all signals

Serial Communication Parameters  
Parity None, Even, Odd, Space, Mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
Flow control RTS/CTS, XON/XOFF
Speed 50 bps to 921.6 Kbps

Power Requirements  
Power Consumption 30 mA@5 VDC

Mechanical  
Dimensions UPort 1110/1130/1150: 37.5 x 20.5 x 60 mm (L x W x H)
UPort 1150I: 52 x 80 x 22 mm (L x W x H)
Material UPort 1110/1130/1150: ABS + PC
UPort 1150I: Metal
Gross Weight UPort 1110/1130/1150: 60 g (0.13 lb)
UPort 1150I: 80 g (0.17 lb)

Environmental  
Operating Temperature 0°C to 55°C (32°F to 131°F)
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Operating Humidity 5% RH to 95% RH

Regulatory Approvals  
EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-8, FCC Part 15 Class B

Warranty  
5 years

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: