Analog output module

New product
 
More info

This new generation Smart IO Modules based on RS485 Modbus communication is available now for data acquisition and other applications. These IO Modules offer good reliability, easy for installation, easy maintenance, wide range of operating input power, communication isolation of 3000VDC, watchdog timer to monitor remote host such as PC, PLC, PAC. They can be easily added into existing RS485 modbus network. Different types of IO Modules are available for the users to select as per their requirement. All Modules are having LED indications for monitoring the status of inputs(Digital) and fault diagnostics. Analog input modules are available with universal inputs also. They can accept voltage, current and thermocouple signals. The analog inputs are isolated between channels. Special modules are available with high interchannel isolation between channels and high isolation betweeen channel and ground for special applications. These IO Modules can configured as slaves with Modbus RTU Protocol to communicate with Modbus Master such as PLC, HMI, SCADA. All IO Modules have 2 wire RS485 Interface with Modbus RTU Protocol

Features

  • Portable low-cost IO modules addition to existing PLC/SCADA system
  • Modbus connectivity on RS485 Network
  • Wide range of baud rates for communication from 1200 BPS to 115.2K BPS
  • IO modules used with the third party softwares via Modbus RTU protocol
  • Interface with field devices to provide real-time data for SCADA/PLC/HMI
  • Simple setup and easy handling
  • Simple DaisyChain Connection without wiring
  • Various types of IO Modules AI, AO, DI, DO, RTD, thermocouples are available
  • Availability of universal Input (Current/Voltage/Thermocouple) Modules
  • High resolution analog input modules
  • Wide power input range from 10V to 60V DC
  • Over voltage protection and 3000V DC isolation for communication
  • User friendly setup software for configuration and troubleshooting
  • Data acquisition software for data storage and Real-Time analysis on PC
  • LEDs on every module for digital IO status, communication and power supply
  • Hot swap and auto configuration

 
Specification
Analog Output Modules 
Model No 8AOU
No of Channels 8
Power Consumption 1.6W
Type of Input Current, Voltage
Voltage Input Range ±1V, ±5V, ±10V, 0~1V, 0~5V, 0~10V
Current Input Range 4~20mA, 0~20mA
Resolution 12 Bit
Output Response Time 10ms per Channel
Independent Channel Configuration Yes
Open Wire Detection Yes. For 4~20 mA only
Accuracy ±0.1% FSR
Programmable output Slope

Voltage: 0.0625~512V/sec,
Current:0.125~1024mA/sec

Voltage Output Capacity 10V@10mA
Current Output Capacity 500Ω
Indicators 8 LED Indicators for Analog Output and Fault indication
Power ON Value Yes. Programmable
Safe Value Yes. Programmable

General Specifications
Power Supply voltage 10 to 60V DC
Reverse Polarity Protection Yes
Watchdog Timer Systerm:1.6 Seconds Fixed
Communication: Programmable
Connector Type #16~30AWG plug in Terminal Block
Dimension (L*W*H) 115.2*47.2*134.7mm
Operating Temperature -25℃ to 70℃
Storage Temperature -30℃ 75℃
Humidity 5 to 95%
Communication Interface RS485
Communication Protocol Modbus RTU
Baudrate 1200, 2400, 4800, 9600, 19200, 38400, 57600 BPS and 115.2 KBPS
Communication Isolation Protection 3000V DC

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: