J5 Indicator & transmitter with strain gauge input.

J5 Indicator & transmitter with strain gauge input. Accurate measurement of melt pressure and other process variables

More details

New product
 
More info

Features

  • Panel mount indicator 96 x 48 mm
  • 1 high level or strain gauge input
  • 1 Auxiliary high level input (optional)
  • 1 retransmission output (optional)
  • Automatic calibration routine
  • Tare function for load cells
  • Display of IN1, IN or CIN inclusive of value, peak and valley and hold value
  • RS 485 port with ModBus RTU Protocols (optional)
  • 1 display, 5 digits, h: 15.5 mm, configurable green or red colour
 
Specifications

Process inputs:

1 Main Input IN1

- Voltage (V):  0/1...5 V, 0...10V
- Voltage (mV): 0/10...50 mV
- Current (mA): 0/4...20 mA
- Strain gauge: 350 Ω, with bridge excitation voltage: 5 V or 10 V
Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)

Auxiliary input IN2 (Optional)

- Voltage (V):  0/1...5 V, 0...10V
- Current (mA): 0/4...20 mA
Accuracy : 0.1% ±1 digit: between 85...240 Vac the error is negligible
Resolution: 16 Bit

3 digital inputs

- NPN
- TTL
- Free Voltage

Keyboard

Mechanical:
3 multifunction keys + 1 dedicated for alarm acknowledge

Process outputs:

1 High level analogue output:

- Current (mA): 0/4...20 mA

Up to 4 Optional outputs:

OUT1
- RELAY SPDT, 2A/250Vac
OUT2 
- RELAY SPST-NO, 2A (250VAC)
OUT3
- RELAY SPST-NO, 2A (250VAC)
OUT4
- RELAY SPST-NO, 2A (250VAC)

Power supply:

- 24VDC/VAC
- 100… 240 Vac (50/60 Hz)
Transmitter power supply: 24 Vdc ±20%, 30 mA Max

Functions:

Calculated value (CIN) Selectable between

- IN1 or IN2
- IN1 + IN2
- IN1 – IN2
- IN1 * IN2
- IN1/IN2
- (IN1 + IN2)/2 (average)
- MAX (IN1, IN2) (maximum value)
- Min (IN1, IN2)  (minimum value)
Display indication of :
- Main input IN1
- Auxiliary input IN2
- Calculated Value CIN
- Peak and Valley indication
- Hold and temporized indication
- Automatic calibration routine
- Tare function for load cells

Alarms

- Up to 4 configurable alarms
- ISA-A Acknowledge function

Communication and programming:

Interfaces

- RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)

Programming/configuration tools:

- Code selection
- Easy to use front interface for configuration
- Configuration software available for PC

Installation:

Mounting method: panel mount
Case dimensions: 96 x 48 mm, depth 110 mm (1/8 DIN)

Connections

Signals connection
36 poles 5.5 mm² screw terminals block
Protection factor : IP 65 front protection

Display and indicators

1 display, 5 digits, h: 15.5 mm, configurable green or red colour
4 Alarm and 3 DI LED indicators

Connectable to:

- Any controller from Ascon Tecnologic range with the appropriate I/Os
- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

15 other products in the same category: