LS2000 Low-Cost Level Sensor

Simple, low cost point level switch that provides reliable level detection in a wide variety of liquid and dry materials.

More details

New product
 
More info

The LS2000 is a simple, low cost point level switch that provides reliable level detection in a wide variety of liquid and dry materials. Unlike mechanical devices, the LS2000 level switch has no moving parts to wear out, jam or break, significantly reducing the need for regular maintenance and cleaning. Calibration is a snap, one piece design makes installation quick and easy. Proprietary radio frequency (RF) technology provides excellent level measurement and stability while having the ability to ignore significant product buildup, thus eliminating the need for recalibration.

Overview

When the probe is installed, it is calibrated in absence of material touching the probe. When the desired material comes in contact with the probe, the relay switches and gives the desired output.

The standard probe is made of a solid 316 stainless steel rod, ¾" NPT process connection and the insulator is made of Ultra-High Molecular Weight Polyethylene (UHMWPE). Teflon insulators are optional. UHMWPE has excellent abrasion and impact resistance while the optional Teflon insulators allow for high temperature operations. The standard seals are made with Viton "O" rings. All the electronics are housed in a cast aluminum explosion-proof enclosure.

The solid stainless steel rod is available in a variety of lengths and is suited for liquids or bulk solids. These probes can be coated with Halar in lengths up to 72 inches. A blind-end probe option is also available for applications where a wet material build-up may foul a horizontally mounted probe.

The blind-end unit has no visible probe because the insulating material completely covers the sensing probe. All the necessary calibration indicators are on-board so all you need to calibrate the LS2000 is a small screwdriver.

Features

  • 10 amp, SPDT relay output
  • Solid state, no moving parts
  • Simple installation and calibration
  • Explosion proof housing standard
  • Probe length easily field modified
  • Fail safe electronics

Applications

  • High or low level alarms
  • Sump control
  • Oil/water interface detection
  • Dry pump protection

Liquids:

  • Waste/Wastewater
  • Acids/Caustics
  • Chemicals/Oils
  • Slurries
 

Dry Solids:

  • Flour/Grains
  • Powders
  • Plastics
  • Sand/Cement

Specifications

ELECTRICAL:

Power: 115VAC (+/- 15%) 60Hz, 2 watts or 24VDC @ 32 mA maximum

Output: 1 Form C Contact SPDT relay, 10amp resistive at 125VAC, 8 amp @ 250VAC, 5 amp @ 30VDC

Failsafe: Selectable High or Low level

RF Frequency: Approx. 1.3 MHz

ENVIRONMENTAL:

Temperature: UHMWPE insulator -30F to 180F

Teflon insulator   -30F to 450F

Pressure:300 psi @ 75F   Note: at 180F, psi should not exceed 15psi

Hazardous Area: Housing is CSA and UL approved for Class I, Div. 1, Groups C & D; Class II,Groups E, F & G; Class III NEMA 4


Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.

 
Contact Us

After saving your customized product, remember to add it to your cart.

Text

loader

* required fields

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: