HA Autoclaveable Pressure Sensor

New product
 
More info

Anderson-Negele’s Autoclaveable HA Sanitary Pressure Transmitter is specifically designed for critical measurements in applications where equipment is autoclaved. Developed from the highly stable “Mini” HA Pressure Transmitter, the Autoclavable HA takes the versatility of a small form factor transmitter to the next level by withstanding the stress of the autoclave environment. Its one-piece stainless steel package design incorporates a transducer and electronic circuitry to convert pressure and/or vacuum to a proportional 4-20 mA signal.

Process pressure measurement in pipes and vessels, process temperatures up to 150°C (302°F)

Features

  • Completely autoclaveable
  • Product contact surfaces electropolished Ra < = 0,2 μm
  • Intrinsically safe
  • Incl. material certificates
  • Compact low profile design
  • Output remains stable through repeated autoclave cycles
  • Rated NEMA 4X & 6P, IP67 & 69k
 
Specifications
Part No.
HA6025M00201200
Product Code
HA
Housing
Conduit Housing
Range
30" Hg/0
Engineering Units
"Hg (inches Mercury)
Fitting
3/4" Tri-Clamp
Sensor Option
Standard Sensor
Diaphragm Material
316L Stainless Steel
Diaphragm Finish
Electropolished (R=8)
Cable Length
No Cable
Accuracy
±0.5% of full scale
Over-Range Rating
2 times base range
Process Temperature Limits
30 – 300°F (-1 – 149°C) (Horizontal Mount recommended over 275°F (135°C)
Ambient Temperature Limits
0 – 120°F (-18 – 49°C)
Max. Autoclave Temperature
124°C (255°F) for 1 hour
Response Time
200 μSec
Calibration Stability
±0.3% of calibrated range for 6 months
Environmental Humidity
0 – 100% Condensing
Supply Voltage
10-40 VDC (Absolute), 24 VDC Nominal regulated or unregulated
Outputs
4-20mA DC, 2 wire with non-interrupting circuit verification
Electrical Wiring Connection
16 AWG max., Screw Terminal
EC1
1/2" NPT threaded housing electrical entry equipped with: replaceable M12 5-pin Eurofast QDR / Optional - 1/2" NPT cord grip
Process Connections
1.5” Tri-Clamp® and CPM
Wetted Materia and Finish
316L SS electropolished (Ra max. = 8 microinches, 0.2 microns)
Housing Material
304 SS
Actuating Fill
100% mineral oil. Meets FDA requirements (21 CFR, 172.878 and 178.3620(a))
Weight
1.01 lb (0.453 kg) app. (varies with fitting)
Enclosure Compliance/Protection Class
NEMA 4X
CP1
IP66 (When equipped with QDR)
CP2
Intrinsically safe for use in Class 1, Div. 1, Groups A-D / CE Compliant (EMC Industrial Locations)
CP3
Designed and manufactured to sound engineering practices in accordance with Article 3.3 of the PED 97/23/EC
CP4
CSA B51-03
CP5
CRN# CSA0F9754.5C (except Mini CPM fitting 161)
Warranty
1 year

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

11 other products in the same category: