HC2-HS28/HC2-HS42 Handheld Probe

For Measuring Humidity in Paper Stacks or Rolls

More details

New product
 
More info

Sword probes of 280 mm or 420 mm

Features

  • Range of measurement: -40â¦85 °Câ/ 0â¦100 %RH
  • Digital interface (UART) and scalable analog outputs, 0â¦1 V
  • Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
  • Adjusted at 23 °C and 10, 35, 80 %RH
 
Specifications
Probe type Sword probe
Dimensions 18 x 280 mm / 18 x 420 mm
Weight 220g / 240g
Operating range electronics -40…85 °C / 0…100 %RH
Accuracy at 23 ±5 °C ±0.8 %RH / ±0.1 K
Accuracy w. adjustment profile "standard" at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K
Power supply / Power consumption 3.2…5 VDC, Calibrated @ 3.3 VDC / ~4.5 mA
Long-term stability sensor <1 %RH / year
Humidity sensor Hygromer IN-1
Temperature sensor PT100 1/3 DIN Class B
Probe protection Slots in sword blade
Response time t 63 <15 sec.
Allowed wind speed 3 m/s
Psychrometric calculations Dew or frost point
Reproducibility Airchip <0.02 %RH / 0.01 K
Exploitation software ROTRONIC HW4.2
Probe adjustment by software 1 Point & multipoint %RH & °C
Firmware update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Type of output signals 2 x 0…1 VDC
Analog outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Service Interface UART
Reverse voltage protection Mechanically in the connector
Probe material Aluminium
Probe cable material TPU
Enclosure material Handle: POM, black / probe: Aluminum
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: