HC2-P05 Handheld Probe

For Measuring Humidity in Dust-free Bulk Materials

More details

New product
 
More info

The insertion probe is suitable for measurement in dust-free bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.

Features

  • Range of measurement: -40â¦85 °C / 0â¦100 %RH
  • Digital interface (UART) and scalable analog outputs, 0â¦1 V
  • Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
  • Adjusted at 23 °C and 10, 35, 80 %RH
 
Specifications
Dimensions ∅ 5 x 200 mm
Weight 160g
For use with HygroLab C1, HP23-AW-A
Operating range electronics -40…85 °C / 0…100 %RH
Range of application -40…85 °C (-40…185 °F) / 0…100 %RH
Accuracy at 23 ±5 °C ± 0.015 aw / 1.5 %RH / ±0.3 K
Accuracy w. adjustment profile "standard" at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K
Power supply 3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term sensor stability <1 %RH / year
Humidity sensor HYGROMER® WA-1 / Pt-100, 1/3 DIN Class B
Temperature dependence 0.001 K/K, 0.0002 aw/K
Temperature sensor PT100 1/3 DIN Class B
Filter type None
Response time t 63 <15s
Allowed wind speed 40 m/s, with filter
Psychrometric calculations Dew or frost point
Reproducibility Airchip <0.02 %rh / 0.01 K
Start-up time 1.5s
Measurement interval 1s
Reverse voltage protection Mechanically in the connector
Max. cable length service cable 5m
Probe material Stainless steel 1.4305 (V2A)
Enclosure material POM
IP protection rating IP50
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible
FDA / GAMP FDA 21 CFR part 11 / GAMP5
CE / EMC conform 2007 / 108 / EG

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: