HC2-P05 Handheld Probe

For Measuring Humidity in Dust-free Bulk Materials

More details

New product
More info

The insertion probe is suitable for measurement in dust-free bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.


  • Range of measurement: -40â¦85 °C / 0â¦100 %RH
  • Digital interface (UART) and scalable analog outputs, 0â¦1 V
  • Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
  • Adjusted at 23 °C and 10, 35, 80 %RH
Dimensions∅ 5 x 200 mm
For use withHygroLab C1, HP23-AW-A
Operating range electronics-40…85 °C / 0…100 %RH
Range of application-40…85 °C (-40…185 °F) / 0…100 %RH
Accuracy at 23 ±5 °C± 0.015 aw / 1.5 %RH / ±0.3 K
Accuracy w. adjustment profile "standard"at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K
Power supply3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term sensor stability<1 %RH / year
Humidity sensorHYGROMER® WA-1 / Pt-100, 1/3 DIN Class B
Temperature dependence0.001 K/K, 0.0002 aw/K
Temperature sensorPT100 1/3 DIN Class B
Filter typeNone
Response time t 63<15s
Allowed wind speed40 m/s, with filter
Psychrometric calculationsDew or frost point
Reproducibility Airchip<0.02 %rh / 0.01 K
Start-up time1.5s
Measurement interval1s
Reverse voltage protectionMechanically in the connector
Max. cable length service cable5m
Probe materialStainless steel 1.4305 (V2A)
Enclosure materialPOM
IP protection ratingIP50
FDA/GAMP compatibilityFDA 21 CFR Part 11 and GAMP compatible
FDA / GAMPFDA 21 CFR part 11 / GAMP5
CE / EMC conform2007 / 108 / EG

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.


Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: