HC2-CO4/HC2-CO5 Compact Humidity Probe

For Tight Spaces for Heavy Industrial Applications with Through Wall Installations

More details

New product
 
More info

This ROTRONIC industrial probe is especially suitable for high temperatures and demanding industrial environments. It measures humidity and temperature and calculates the dew/frost point.

Features

  • Range of measurement: -100â¦200 °C / 0â¦100 %RH
  • Digital interface (UART) and scalable analog outputs, 0â¦1 V
  • Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
  • Adjusted at 23 °C and 10, 35, 80 %RH
 
Specifications
Probe type Industrial probe
Dimensions Ø15 x 100mm / Ø15 x 250mm / Ø15 x 400mm / Ø15 x 550mm / Ø15 x 700 mm
Weight 230g / 260g / 290g / 330g / 350g /
Operating range electronics -50…100 °C / 0…100 %RH
Accuracy at 23 ±5 °C ±0.8 %RH / ±0.1 K
Accuracy w. adjustment profile "standard" at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Measuring range -100...200 °C (short-term peak load) / 0...100 %RH
Power supply / Power consumption 3.3 V ± 0.1V / ~4.5 mA
Long-term sensor stability <1 %RH / year
Humidity sensor Hygromer IN-1
Temperature sensor PT100 1/3 DIN Class B
Probe protection Filter carrier, brass nickelplated
Filter cartridge depending on the application, order separately
Response time t 63 <15 sec.
Allowed wind speed 3 m/s
Psychrometric calculations <0.02 %RH / 0.01 K
Exploitation software ROTRONIC HW4.2
Probe adjustment by software 1 Point & multipoint %RH & °C
Firmware update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Type of output signals 2 x 0…1 VDC
Analog outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Service Interface UART
Reverse voltage protection Mechanically in the connector
Sensor frame for %RH and °C sensor Yes
Max. cable length service cable 5 m
Probe material PEEK
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: