HC2-IMxxx-M Stainless Steel Probe

For Through Wall Installation

More details

New product
 
More info

This stainless steel industrial probe is especially suitable for high temperatures, demanding industrial environments and areas where hygiene plays an important role. The probe measures humidity and temperature and calculates the dew/frost point.

Features

  • Range of measurement: -100â¦200 °C1, (screw-in probe; -50â¦200 °C1) / 0â¦100 %RH
  • Digital interface (UART) and scalable analog outputs, 0â¦1 V
  • Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
  • Adjusted at 23 °C and 10, 35, 80 %RH
  • Cannot be operated with 2-wire transmitters
 
Specifications
Probe type Industrial metal probe
Dimensions Ø15 x 130mm / Ø15 x 280mm / Ø15 x 430mm / Ø15 x 580mm
Weight 260g / 400g / 540g / 680g
Operating range electronics -50…100 °C / 0…100 %RH
Accuracy at 23 ±5 °C ±0.8 %RH / ±0.1 K
Accuracy w. adjustment profile "standard" at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K
Power supply / Power consumption 3.3 V ± 0.1V / ~4.5 mA
Long-term stability sensor <1 %RH / year
Humidity sensor <1 %RH / year
Humidity sensor Hygromer IN-1
Temperature sensor PT100 1/3 DIN Class B
Probe protection Filter carrier, brass nickelplated
Filter cartridge depending on the application, order separately
Response time t 63 <15 sec
Allowed wind speed 3 m/s
Psychrometric calculations Dew or frost point
Reproducibility Airchip <0.02 %RH / 0.01 K
Exploitation software ROTRONIC HW4.2
Probe adjustment by software from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Type of output signals 2 x 0…1 VDC
Analog outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Service Interface UART
Reverse voltage protection Mechanically in the connector
Max. cable length service cable 5 m
Probe material Stainless steel 1.4305 (V2A)
Probe cable material FEP, black
Enclosure material Stainless steel 1.4305 (V2A)
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: