This stainless steel industrial probe is especially suitable for high temperatures, demanding industrial environments and areas where hygiene plays an important role. The probe measures humidity and temperature and calculates the dew/frost point.
Features
Probe type | Industrial metal probe |
Dimensions | Ø15 x 130mm / Ø15 x 280mm / Ø15 x 430mm / Ø15 x 580mm |
Weight | 260g / 400g / 540g / 680g |
Operating range electronics | -50…100 °C / 0…100 %RH |
Accuracy at 23 ±5 °C | ±0.8 %RH / ±0.1 K |
Accuracy w. adjustment profile "standard" | at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K |
Power supply / Power consumption | 3.3 V ± 0.1V / ~4.5 mA |
Long-term stability sensor | <1 %RH / year |
Humidity sensor | <1 %RH / year |
Humidity sensor | Hygromer IN-1 |
Temperature sensor | PT100 1/3 DIN Class B |
Probe protection | Filter carrier, brass nickelplated |
Filter cartridge | depending on the application, order separately |
Response time t 63 | <15 sec |
Allowed wind speed | 3 m/s |
Psychrometric calculations | Dew or frost point |
Reproducibility Airchip | <0.02 %RH / 0.01 K |
Exploitation software | ROTRONIC HW4.2 |
Probe adjustment by software | from Software HW4 (devicemanager) |
Data processing via HW4 | with interface cables |
Device Protection by password | Yes |
Type of output signals | 2 x 0…1 VDC |
Analog outputs scaleable by the user | Yes |
Analog output signal (standard) | 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C |
Digital output signal (standard) | UART |
Service Interface | UART |
Reverse voltage protection | Mechanically in the connector |
Max. cable length service cable | 5 m |
Probe material | Stainless steel 1.4305 (V2A) |
Probe cable material | FEP, black |
Enclosure material | Stainless steel 1.4305 (V2A) |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |