The HC2-S/HC2-S3 is the most versatile probe from ROTRONIC and forms the basis of the product portfolio. It measures humidity and temperature and calculates the dew/frost point.
Features
Probe type | Meteorological probe |
Dimensions | 15 x 82 mm |
Operating range electronics | -50…100 °C / 0…100 %RH |
Accuracy at 23 ±5 °C | ±0.8 %RH / ±0.1 K |
Accuracy w. adjustment profile "standard" | at 23 °C / 10, 35, 80 %RH ± 0.8 %RH / ± 0.1 K |
Power supply / Power consumption | 3.2…5 VDC ±0 % / < 4.5 mA |
Current consumption | 4.5 mA at 3.3 VDC |
Long-term sensor stability | <1 %RH / year |
Humidity sensor | Hygromer IN-1 |
Temperature sensor | Pt100 Class A |
Probe protection | Polycarbonate plastic cage, white |
Filter cartridge | Polyethylene dust filter, white, 40 um |
Filter type | Wire mesh filter |
Response time t 63 | <15 sec. |
Allowed wind speed | 20 m/s, with filter |
Psychrometric calculations | Dew or frost point |
Reproducibility Airchip | <0.02 %RH / 0.01 K |
Software | ROTRONIC HW4 |
Probe adjustment by software | 1 Point & multipoint %RH & °C |
Firmware update | With internet and HW4 software |
User information | from Software HW4 (devicemanager) |
Data processing via HW4 | with interface cables |
Device Protection by password | Yes |
Type of output signals | 2 x 0…1 VDC |
Analog outputs scaleable by the user | Yes |
Analog output signal (standard) | 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C |
Digital output signal (standard) | UART |
Service Interface | UART |
Reverse voltage protection | Mechanically in the connector |
Max. cable length service cable | 5m |
Probe material | PEEK |
Enclosure material | Polycarbonate |
Housing | Polycarbonate |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |