HC2-S3H Meteorological Probe

Fulfills the highest demands on measuring accuracy

More details

New product
 
More info

The HC2-SH/HC2-S3H fulfills the highest demands on measuring accuracy. It measures humidity and temperature and calculates the dew/frost point.

Features

Accuracy: ±0.5 %rh, ±0.1 K, at 23 °C ±5 K
Range of measurement: -50â¦100 °C / 0â¦100 %RH
Digital interface (UART) and scalable analog outputs, 0â¦1 V
Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
Adjusted at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH, then calibrated at 20, 50, 80 %RH

 
Specifications
Probe type Meteorological probe
Dimensions 15 x 82 mm
Operating range electronics -50…100 °C / 0…100 %RH
Accuracy at 23 ±5 °C ±0.5 %RH / ±0.1 K
Accuracy w. adjustment Accuracy w. adjustment profile "High Precision" at 23 °C / 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH ± 0.5 %RH / 0.1 K
Power supply / Power consumption 3.2…5 VDC ±0 % / < 4.5 mA
Current consumption 4.5 mA at 3.3 VDC
Long-term sensor stability <1 %RH / year
Humidity sensor Hygromer IN-1
Temperature sensor Pt100 Class A
Probe protection Polycarbonate plastic cage, white
Filter cartridge Polyethylene dust filter, white, 40 um
Filter type Wire mesh filter
Response time t 63 <15 sec.
Allowed wind speed 20 m/s, with filter
Psychrometric calculations Dew or frost point
Reproducibility Airchip <0.02 %RH / 0.01 K
Software ROTRONIC HW4
Probe adjustment by software 1 Point & multipoint %RH & °C
Firmware update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Type of output signals 2 x 0…1 VDC
Analog outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %RH; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Service Interface UART
Reverse voltage protection Mechanically in the connector
Max. cable length service cable 5m
Probe material PEEK
Enclosure material Polycarbonate
Housing Polycarbonate
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

17 other products in the same category: