KM5 Controller programmer

With 8 programs and 96 segments

New product
 
Specifications

- Dimensions 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminals)
- Front protection degree IP65, with gasket
- Double LED display:
- Main Display: 4 digit, 3 dynamic color red, green and amber h 15.5 mm
- Secondary Display: 4 digit, green h 7 mm
- 1 input for temperature probes: tc J, K, N, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990Ω@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
- Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
- 1 or 2 digital inputs for free voltage contacts, depending on the configuration code of the instrument (the second digital input is an alternative to OUT4)
- Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%) Frequency: 50/60 Hz
- Power consumption: 7 VA max.
- OUT1: Relay SPST-NO 4A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
- OUT2: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
- OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
- OUT4 programmable: voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
- SERVOMOTOR drive
- 3 configurable alarms as absolute, deviation and band
- 4 selectable Set Point
- Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
- Communication speed: 2400 ... 38400 baud
- PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
- 8 programs with 96 segments
- “Segment recovery” + “elapsed time recovery” (resolution 1 minut) to restart after supply cut off
- Possibility to manage sequences up to 4 programs even with different base time (h.min - min.s)
- Up to 999 cycles
- EVOgreen function: stand by mode of display (selectable)
- Connections: 16 screw terminals 2.5 mm ² (AWG14 AWG22. ..) fix, removable or clamp type

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

20 other products in the same category: