KX3 Controller, programmer w/ independent timer

New product
 
Specifications

Dimensions 48 x 96 mm (1/8 DIN), depth 76 mm
Front protection degree IP54, with gasket
Double LED display:
- Main Display: 4 digit, 3 dynamic colors red, green and amber h 15.5 mm
- Secondary Display: 4 digit, green h 7 mm + 20 segments Bargraph
1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990Ω@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on the configuration code of the instrument (the second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ...240 VAC / VDC (-15% / +10%) Frequency: 50/60 Hz
Power consumption: 7 VA max.
OUT1: Relay SPST-NO 4A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
OUT2: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10%
OUT4 programmable: voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
SERVOMOTOR drive
3 configurable alarms as absolute, deviation and band
4 selectable Set Point
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
Communication speed: 2400 ... 38400 baud
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Programmer 8 segments with guaranteed soak
Independent timer with 5 operating modes
EVOgreen function: stand by mode of display (selectable)
Wattmeter for the calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with alarm resettable
Connections: 16 screw terminals 2.5 mm ² (AWG14 AWG22. ..) fix, removable or clamp type

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

20 other products in the same category: