K48 Mini-programmer controller

New product
 
More info

Features

  • Panel mount controller 48x48 mm
  • 1 Configurable probe input
  • Up to 3 digital outputs
  • PID controller with: 
    • Independent timer
    • 8 segment programmer (optional)
    • Wattmeter
    • Counter for worked days and hours
    • Compressor protection timer
  • TTL port
  • 1 display line, 4 digit, h 12 mm, red or blue colour
 
Specifications

Process inputs:

1 temperature probe input

- Thermocouples: J, K, R, S,T
- PTC KTY81-121 (990 Ω @ 25 °C)
- NTC 103AT-2 (10KΩ @ 25 °C)
- RTD: Pt100
- Voltage (V): 0..1 V, 0/1...5 V , 0/2...10 V
- Voltage (mV): 0...50 mV, 0...60 mV, 12 ...60 mV
- Current (mA): 0/4...20 mA
- Custom linearisation and IR probes (J.K type)
Overall accuracy: ± (0,5 % span ± 1 digit @25 °C); Tc S: ± (1 % span ± 1 digit @ 25 °C)

Keyboard

Mechanical: 4 multifunction keys

Process outputs

Up to 3 outputs:

OUT1
- RELAY SPST-NO, 8A
- SSR Drive
OUT2 
- RELAY SPST-NO, 8A
- SSR Drive
OUT3
- RELAY SPST-NO, 5A
- SSR Drive

Power supply:

- 24 VAC/VDC
- 100… 240 VAC (50/60 Hz)
Transmitter power supply: 10 VDC (±10%), 20 mA max.

Functions

- ON/OFF control with neutral zone
- PID single action or double action (Heat/Cool) with overshoot control
- Bumpless ramp to set point change
- Start-up delay
- Independent timer with 4 functioning modes (optional)
- Digital Setpoint retransmission (Note 1)
- Up to 4 memorized setpoints
- 8 segment programmer with events recovery, 2 events and guaranteed soak (optional)
- Wattmeter for calculating the instantaneous power and energy used
- Counter for days and hours worked
   with programmable threshold for programmed maintenance
- Compressor protection timer

Autotuning

- Adaptive Autotuning
- Oscillatory
- Fast

Alarms

- Up to 3 configurable alarms + loop break alarm

Communication and programming:

Interfaces

Communication on TTL port to: 
- Universal programming key
- Remote display

Programming/configuration tools:
- Configurable parameter level “Promotion”
- Configuration software available for PC

Installation

Mounting method: panel mount
Case dimensions: 48 x 48 mm (1/16 DIN)

Connections

Communication port connection
5 Pole TTL Port
Connection
12 poles 2.5 mm² screw terminals block
Front protection: IP 65 (with gasket) according to EN 60070-1 for indoor use

Display and indicators

1 display line, 4 digit, h 12 mm, red or blue colour
3 LED Bargraph

Connectable to:

- Programming key A01 for PC connection, backup and other functions
- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring

Notes

1) Digital Setpoint retransmission available only with external adapter from TTL

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

20 other products in the same category: