M5 1/16 DIN Process controller setpoint programmer

New product
 
More info

Features

  • Panel mount controller 48x48 mm
  • 1 Configurable input, 1 auxiliary input and 2 digital inputs
  • Up to 3 Digital outputs and 1 analogue output
  • PID single action or double action (Heat/Cool)
  • Floating servomotor
  • 16 segment programmer (optional)
  • RS 485 ModBus RTU port (optional)
  • 2 display lines, 4 digits each, green colour
 
Specifications

Process inputs:

1 Universal input

- Thermocouples: J, K, L, S, T, R
- RTD: Pt100
- Voltage (V): 0/1...5 V, 0...10V
- Voltage (mV): 0/10...50 mV
- Current (mA): 0/4...20 mA
- Custom linearisation and IR probes (J.K type)
Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)

Auxiliary input(Optional)

- Voltage (V):  0/1...5 V, 0...10V
- Current (mA): 0/4...20 mA
- 1 current transformer input for load monitoring (optional) 50 or 100 mA jumper selectable
- Potentiometer: 100Ω ... 10 kΩ

2 digital inputs

- Free Voltage

Keyboard

Mechanical: 6 multifunction keys

Process outputs

1 High level analogue output(optional):

- For process control
- For PV/SP retransmission
- Current (mA): 0/4...20 mA

Up to 3 Digital outputs

OUT1
- RELAY SPST-NO, 2A/250Vac
- TRIAC 1A 250 VAC
OUT2 
- RELAY SPST-NO, 2A/250Vac
- TRIAC 1A 250 VAC
OUT3
- RELAY SPST-NO, 2A/250Vac
- TRIAC 1A 250 VAC

Power supply:

- 24VDC/VAC
- 100… 240 Vac (50/60 Hz)
Transmitter power supply: 18 Vdc ±20%, 30 mA Max

Functions

- ON/OFF control
- PID single action or double action (Heat/Cool)
- Floating servomotor
- Auto/Man station with bumpless action
- Remote setpoint
- 2 memorized setpoints
- 16 segment programmer (optional)

Autotuning

- Autotuning with natural frequency
- Autotuning with step response
- Adaptive Autotuning

Alarms

- Up to 4 configurable alarms

Communication and programming:

Interfaces

- RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)

Programming/configuration tools:

Fast View for immediate and easy access to 10 selectable parameters
- Easy to use front interface for configuration
- Configuration software available for PC

Installation

Mounting method: panel mount
Case dimensions: 48 x 48 mm (1/16 DIN)

Connections

Signals connection
18 poles 5.5 mm² screw terminals block
Protection factor: IP 65 front protection

Display and indicators

2 Display lines, 4 digits (PV) h: 10 mm, 4 digits (SP/OP) h 8 mm, green colour
3 LED Bargraph + 2 Alarm and 1 Transmission LEDs

Connectable to:

- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

20 other products in the same category: