Featured Products
Sophisticated multi-unit process controller with high level communications. The X5 line can interface, on different levels, with other devices, by exchanging informations, after processing them by mathematical package. The frequency input, added to the traditional inputs, two retransmission or control analogue outputs and four programs allow you to use if for the most diversified control strategies.
Features
- Panel mount controller 48 x 96 mm
- 1 Configurable input
- 1 Auxiliary input
- Up to 4 digital outputs
- Up to 2 analogue outputs
- ON/OFF , PID single or double action, floating servomotor controller with
- Remote setpoint
- 2 memorized setpoints
- 2 prog. 16 seg. programmer(optional)
- RS 485 ModBus RTU
- (Master and / or Slave ) port (optional)
- 1 field bus port to Profibus-DP (optional)
- 2 Display lines:
- 4 digits (PV) h: 12 mm
- 4 digits (SP) h: 9 mm
- 4 digits (SP) h: 9 mm
- 4 digits (OP%) h: 7 mm
- Green colour
Process inputs:
1 Universal input
- Thermocouples:
L, J, T, K, S, R, B, N, E, Ni-NiMo, W3, W5
- RTD: Pt100
- Voltage (V): 0/1...5 V, 0...10V
- Voltage (mV): 0/10...50 mV
- Current (mA): 0/4...20 mA
- Custom linearisation and IR probes (J.K type)
Accuracy :
- 0.25% ±1 digit (probes)
- 0.1% ±1 digit (mA or mV)
Auxiliary input
Note 1
- Voltage (V): 0/1...5 V, 0...10V
- Current (mA): 0/4...20 mA
- Potentiometer: 100Ω ... 10 kΩ
3 digital inputs
- Free Voltage
Frequency input (Optional )(Note 1): Configurable range 0...2000 Hz, 0...20000 Hz
Keyboard
Mechanical: 6 multifunction keys
Process outputs
1 High level analogue output:
- For process control
- For PV/SP retransmission
- Voltage (V): 0...10 V, 0...5V, 0...1V
- Current (mA): 0/4...20 mA
1 High level analogue output(optional):
- For process control
- For PV/SP retransmission
- Voltage (V): 0...10 V, 0...5V, 0...1V
- Current (mA): 0/4...20 mA
Up to 4 Digital outputs:
OUT1/OUT2
- RELAY SPST-NO, 2A/250Vac
- TRIAC 1A 250 VAC
OUT3
- RELAY SPDT, 2A (250VAC)
OUT4
- RELAY SPST-NO, 2A/250Vac
- SSR Drive 0...5Vdc, ±20%, 30 mA Max
Power supply:
- 24VDC/VAC
- 100… 240 Vac (50/60 Hz)
Transmitter power supply: 24 Vdc ±20%, 30 mA Max
Functions
- ON/OFF control
- PID single action or double action (Heat/Cool)
- Floating servomotor
- Auto/Man station with bumpless action
- Start-up + Timer (optional)
- Remote setpoint
- 2 memorized setpoints
- 4 programs, 16 segment programmer (optional)
- Mathematical Package (optional)
Autotuning
- Autotuning with natural frequency
- Autotuning with step response
- Adaptive Autotuning
Alarms
- Up to 3 configurable alarms
Communication and programming:
Interfaces
- RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)
- RS 485 port with ModBus RTU and J-bus (Master) protocols (Optional)
- 1 field bus port to Profibus-DP
Programming/configuration tools:
- Fast View for immediate and easy access to 10 selectable parameters
- Easy to use front interface for configuration
- Configuration software available for PC
Installation
Mounting method: panel mount
Case dimensions: 48 x 96 mm (1/8 DIN )
Connections
Communication port connection
- 1 Profibus-DP por on additional D sub connector Signals connection
36 poles 5.5 mm² screw terminals block
Protection factor: IP 65 front protection
Display and indicators
3 Display lines, 4 digits (PV) h: 12 mm, 4 digits (SP) h: 9 mm, 2 digits (OP) h: 7 mm, green colour
8 status + 3 Alarm + 2 control output LEDs
Connectable to:
- SCADA for monitoring, traceability and remote management
- DX and DY gateways for remote monitoring
Notes
1 ) Frequency input is not available with Remote setpoint
