NSL-M Compact Potentiometric Level Transmitter

New product
 
More info

Probe type process level transmitter is the compact, high temperature alternative to the LN. Accommodates Top down, bottom up and side mount installations. Measurement is temperature and pressure independent. Optional user interface MPI-200 allows field configurability of orientation, range, and signal output options.

Range of Application

  • Continuous level measurement in metallic vessels up to 10 ft (3 meters) in height
  • Ideal for adhesive and pasty media
  • Level measurement of foaming media
  • Minimum product conductivity typically from 50 μS/cm (available on request for lower values)
  • Hygienic substitute for float sensors

Application examples

  • Process such as balance tanks and fillers
  • Level measurement for both vented and pressurized storage vessels
  • Level monitoring in pressurized vessels

Hygienic design/Process connection

  • Fixed fittings conform to 3-A 74-06 Sanitary Standard
  • Product contacting materials compliant to FDA
  • Option to use Negele CLEANadapt a EHEDG compliant hygienic installation accommodates broad range of process connection adapters
  • Sensor made of stainless steel (protection class NEMA 4X and IP 69 K)
  • CIP-/ SIP-cleaning up to 143 °C / max. 120 minutes

Features

  • Compact and robust sensor easily accommodated on tight tank top real-estate
  • Simple 2-wire sensor with 4...20 mA output signal, with M12-plug as electrical connection
  • Accommodates wide range of process media with little or no required adjustment
  • Individual parameter adjustment or programming via optional PC interface
  • Adapts for both top down or bottom up measurement via optional PC interface
  • Alarms signal (dry, internal error) user adjustable via PC interface

Options/Accessories

  • PVC Molded M12 shielded cord-set
  • Programming adapter MPI-200 with PC software

Function principle

The potentiometric measuring principle measures the change in the voltage ratio between the electrode rod of the sensor and the metallic wall of the filled tank. An electric fl ow fi eld arises in the medium due to the conductivity of the medium and its capacitive properties. This gives rise to a voltage ratio that is proportional to the immersed part of the rod. Because only the ratio of the voltages is considered, the properties of the medium, in particular the electrical conductivity of 50 µS/cm and higher, do not enter into the measurement result. The sensor also provides information on the immersion situation of the electrode rod in the medium by means of a second, patent-pending measurement system. This system analyzes electrical resonance properties to detect foam and suppress it in the results, and to reliably prevent erroneous measurements due to adhesions.

 
Specifications
Part No.
NSLM0000506TC1800A2MM12XXX
Product Code
NSLM
Style
Straight
Probe Length
50 mm
Probe Diameter
6
Process Connection
1"/1-1/2" Tri Clamp
Surface quality
8 Ra <= 0.8 µm (Standard)
Material Certification
No Certification
Installation Position
Installation from Top
Output signal
4...20 mA, analog, 2-Leiter
Electrical connection
M12-Stecker 1.4305, Standard
Insulation at Rod End
Standard
Parameter Configuration
Standard
Process Pressure
16 bar max.
Ambient Temperature Limits
32 – 158°F (0 – 70°C)
Storage Temperature Limits
-40 – 185°F (-40 – 85°C)
Process Temperature Limits
14– 185°F (-10 – 140°C)
CIP/SIP cleaning Temperature Limits
289 °F (143 °C max.) 120 min
Response Time
<100 ms
Tightening Torque
10 Nm
Resolution
<0.1 % of upper range value (= rod length)
Linearity
<1.0 % of upper range value (= rod length)
Reproducibility
<0.2 % of upper range value (= rod length)
Supply Voltage
19-36 VDC
Signal Outputs
analog 4-20 mA, galvanic separated to housing, 2-wire loop
Electrical Connection
M12-plug, 1.4301, 4-pin
Head Material
1.4305 SS
Adapter Material
1.4301 SS
Isolating part Material
PEEK (FDA approval number: 21 CFR 177 2415)
Rod Material and Finish
316L SS / ≤0.8 μm
Weight
1.2lbs with rod length 1.5 m
Compliance/Protection Class
NEMA 4X / IP 67 / IP69 K / CE
Warranty
1 year

Spare Parts

42117K0025 Molded Cordset W/25' Cable
42117K0050 Molded Cordset W/50' Cable
42117K0100 Molded Cordset W/100' Cable

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: