LB/LL Conductive Point Level Sensors and Modules

New product
More info

The LB Point Level probe assemblies are designed to provide long-term reliability in applications where they are continuously exposed to wide temperature swings and repeated CIP cycles. The LB utilizes a new process developed to seal Teflon® insulation to stainless steel probes providing a smooth, thick, permanent coating that’s impervious to conditions encountered in sanitary processing and CIP applications. To simplify installation the LB incorporates an elastomer between the Teflon® and the probe that allows any probe to be shortened by up to six inches in the field.

Switching modules are connected to the probes via a water-tight Quick Disconnect. The module provides Form-C relay contacts for switching or alarming and is supplied with Single Pole/Double Throw (SPDT) contacts. Modules are designed for single level or differential operation and are available in fixed or field adjustable sensitivity. A NEMA 4X enclosure may be specified for mounting the switching module local to the probe.

The LB also features a second proprietary, elastomeric compression seal at the top of each probe to insure a sanitary seal is maintained at the probe-to-fitting junction. No threads exist within or near the product contact zone.

Finally, the LB integrates a stainless steel wiring head that simplifies field wiring and retro-fits to existing electronic controls. The head and fitting assembly can support up to 4 individual probes, plus a separate tank reference connection.

The housing includes a pre-wired and sealed quick-disconnect receptacle and can be specified with a field wireable mating connector or with any length of pre-wired cable.

The quick disconnect even meets NEMA 4X requirements in the disconnected position!


  • Long-Term sterility and cleanability via:
  • all new patent-pending compressed elastomeric seal between the probe and Teflon® coating
  • Proprietary elastomric compression seal at the probe-to-fitting junction
  • Integrated stainless steel head makes retrofits simple
  • Water-tight quick-disconnect includes pre-wired tank ground reference
  • Up to four probes per fitting for multiple level applications
  • Rated for Process temperatures from 30°F (-1°C) to 200°F (94°C)


  • HTST Balance Tanks
  • Cream Balance Tanks
  • CIP System Tanks
  • Silo High Level Alarm
  • Any Atmospheric Tank Containing a Conductive Fluid
Specifications/Spare Parts
Part Number
Product Code
Body (Fitting) Style
1-1/2" Tri-Clamp
Sensor Wiring
Quick Disconnect Receptacle
Number of Probes
One (1) Probe
Probe Coating
Probe Length 1
3 in Long
Probe Length 2
Probe Length 3
Probe Length 4
Temperature Limits
30°F – 200°F (-1°C – 94°C)
Electrical Connection
5 pin M12 Quick Disconnect Receptacle
Housing Material
304 SS
Wetted Material
316L SS, Teflon, Silicone
Wetted Material Surface Finish
Ra max = 25 micro inches (.6 microns)
1 year

Spare Parts

56014R0070 Adjustable Sensitivity Board
73220A0001 Nema 4 Enclosure For Relay Module

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.


Please fill details below and one of our representative will contact you shortly. 

30 other products in the same category: