FD Digital Reference Thermometer

FD Digital Reference Thermometer complies with the provisions of the Pasteurized Milk Ordinance (PMO)

More details

New product
 
More info

The “DART” Digital Reference Thermometer is the only digital thermometer available today that complies with the applicable provisions of the Pasteurized Milk Ordinance (PMO). With accuracy greater than twice that of mercury-in-glass pasteurization thermometers, the DART assures consistent processing. Unlike conventional thermometers which must be viewed at the process location, the “DART” display may be located up to 1500 feet from the sensor.

Its dual-element sensor and proprietary comparator circuitry assure fail-safe performance. Self-diagnostics guarantee continued, reliable service and an internal test feature allows for easy verification of accuracy and performance by regulators. The DART not only meets or exceeds the requirements of the PMO, it stands up to the demands of the pasteurization loop. Dual element DART sensors are built to meet 3-A standards, and are interchangeable requiring no field calibration. As with all critical temperature instruments, DARTs are calibrated to Anderson’s exacting performance requirements and are traceable to the National Institute of Standards and Technology (N.I.S.T.).

For Retort applications, the unique features of the DART also meet the requirements of the updated 21 CFR Part 113 document covering the use of Alternative Temperature Indicating Devices (ATID’s). The DARTs’ dual element comparator circuit ensures that readings are never compromised. With the ability to locate the display up to 1500’ from the sensor, Retort process monitoring can easily be performed in the control room.

Features

  • Meets PMO Provisions
  • Digital display reads to 0.1°F (0.01°C) providing precise and accurate temperature indication
  • Display blanks providing failsafe performance if the differential between RTD elements exceeds .5° F; sensor fails; lead broken; electrical short
  • Sensors can be easily replaced without the need to recalibrate the instrument and with no effect on the DART’s accuracy
  • Degree F/C is user selectable enabling global performance
  • Meets requirements for use as Alternative Temperature Indicating Device (ATID) on Retort cookers
  • Quick Disconnect Receptacle (QDR) sensor connection optional for Retort and
  • Non-PMO applications
 
Download
 
Specifications
Part No. FD11046
Product Code FD
Thermometer Type Digital Reference Thermometer for HTST and VAT Pasteurizers
Voltage 115 VAC 50/60 Hz
Offset Point 100 deg F
Span 200 deg F
Combined Sensor ±0.3°F (±0.16°C) including drift, linearity and Repeatability
Operating Range Fixed at -50 - 350°F

Ambient Temperature Limits 40 - 120°F (5 - 49°C)
Combined Sensor and Display Within four seconds for standard Pasteurized Milk Ordinance test (Appendix l, Test 7)

Calibration Stability Field accessible "Fine" zero ±2.5°F (±1.39°C) only; (tracksfor °F and °C); All remaining factory adjustments sealed; Tocomply with regulatory testing requirements at a threemonthminimum stability to calibrated accuracy - up to aone year maximum calibration cycle

Humidity Fully gasketed and splash proof enclosure, with all stainlessgasket sealed sensor; designed for typical process floormounting

Supply Voltage 115 Volt AC nominal, 50/60 Hz, 85.0 volt, AC minimum,138.0 Volt AC maximum

Outputs Device stand alone with no additional outputs to meet regulatory requirements

Inputs Digital display receives signal from 8-wire, dual elementresistive probe; Probe output custom proprietary curve

Electrical Connection Integral conduit housing with cap sealable by health authority

Process Connections 1-1/2" Tri-Clamp®, 2" Tri-Clamp®, 2-1/2" Tri-Clamp®, 3" Tri-Clamp®, 4" Tri-Clamp®

Display Digital display; ½" LED, 4-1/2 active digits; User selectableF/C units

Sensor Materials and Finishes Housing type 316 SS, wettable surfaces type 316L and 3-Acompliant
Enclosure Materials and Finishes Die cast aluminum coated with two-part urethane paint

Sensor and Enclosure Combined Weight 11 lbs approximate

Compliance/Protection Class Meets requirements of Pasteurized Milk Ordinance for usein VAT and Continuous pasteurizers, ULFDA Milk Safety Branch Memorandum of Compliance withPMO (include integrated meter based timing)

Digital Display Warranty 3 years
Sensor Warranty 1 year

Spare Parts

42117L0006 6' Molded Cordset
42117L0025 25' Molded Cordset
42117L0050 50' Molded Cordset
42117L0100 100' Molded Cordset
56014E0095 115 Vac Power Board
SP56001P0032 4 - 20 Ma Retransmission Board
SP56014E0102 Display Board

Contact Us

“Industrial Technical Services is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels”.

 

Please fill details below and one of our representative will contact you shortly. 

24 other products in the same category: