Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
Fluke 715 Volt/mA Calibrator
Brand:
Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution. Measure voltage output process signals from PLCs, transmitters.
Love0
Features at a Glance
|
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.
16 other products in the same category:
Alicat Scientific
To verify the operation of flow equipment
Fluke
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instrumentsSource/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Fluke
The Fluke 154 is a standalone tablet based HART® communication tool. Combine with a Fluke 750 or 720 Series for a complete HART calibration and configuration solution.
Fluke
Lightweight and very portableAccuracy to ±0.25 °CRS-232 and Interface-it software included
Fluke
The Fluke 753 has features we know you’ll love: increased accuracy, enhanced reliability, and is easier to read in dark environments.
Fluke
Measure temperature from TC outputSimulate TC outputOperable with nine types of thermocouplesCalibrate linear TC transmitter with mV source functionSelectable ºF or ºC
Fluke
Precision Process Calibrator;Balance of economy and accuracy for benchtop calibration of temperature and pressure process instrumentation.
Fluke
Unique new wireless measurement logging capability;Temperature measurement from -200 °C to 1372 °C using the t3000 FC;24 V Loop power supply;HART mode setting with loop power (adds 250 ohm resistor).
Fluke
A large display and simple, pushbutton interface for ease of use.Simultaneous mA and % readout for quick, easy interpretation of readings.mA accuracy of 0.02%
Fluke
Pressure comparator supplies same precisely controlled pressure to both a reference gauge and device under test for calibration.Dual pressure/vacuum capability;Bench mount design.
Fluke
Precise measurement and calibration source performance, accuracies of 0.01%.Two separate channels; Measure, source and view process signals simultaneously;Measure volts, mA, RTDs, thermocouples, frequency, and...
Fluke
Intrinsically Safe Multifunction Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) new Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to...
Fluke
Pressure comparator supplies the same pressure to both a reference gauge and device under test for calibration. Generates pressures to 10,000 psi (700 bar);Bench mounted design.
Fluke
Hydraulic pressure calibration system;No weights to load and unload, transport or send out for calibration.Provides real-time pressure indication. No piston-cylinder changes.
Fluke
Temperatures from –15 °C to 350 °C in one unitTwo wells in each block for simultaneous comparison calibrations
Fluke
The Fluke 709 mA loop calibrator is designed to save time and produce high-quality results. This tool reduces the time it takes to measure, or source, voltage or current and power up a loop.