Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
Dew Point Mirror
Brand:
RHS 473 Continuous measurement of Dew/Frost point and temperature in air and gas mixtures
Love0
Chilled mirror condensation technology provides highly precise, stable and repeatable results. Water vapor condenses onto a temperature controlled mirror surface and the dew point is detected with advanced optical electronics. Since dew point is specific to water vapor concentration and not temperature dependent, measurement precision is consistent across the full application range including high temperature and humidity conditions in climatic test chambers.
The RH Systems Model 473 Dew Point Mirror is a portable instrument equipped with a separate measuring head for both spot and continuous measurement of Dew/Frost point and temperature in air and gas mixtures. Based on the chilled mirror principle, the 473 ensures direct and accurate humidity measurement.
16 other products in the same category:
Fluke
Pressure comparator supplies the same pressure to both a reference gauge and device under test for calibration. Generates pressures to 10,000 psi (700 bar);Bench mounted design.
Fluke
Hydraulic pressure calibration system;No weights to load and unload, transport or send out for calibration.Provides real-time pressure indication. No piston-cylinder changes.
Fluke
Powerful, yet easy-to-use field calibrator. Small, streamlined shape makes it easy to carryRugged, reliable design stands up to field useEasy to read measure/source screen lets you view input and output simultaneously.
Fluke
The Fluke 709 mA loop calibrator is designed to save time and produce high-quality results. This tool reduces the time it takes to measure, or source, voltage or current and power up a loop.
Fluke
Unique new wireless measurement logging capability;Temperature measurement from -200 °C to 1372 °C using the t3000 FC;24 V Loop power supply;HART mode setting with loop power (adds 250 ohm resistor).
Fluke
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instrumentsSource/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Alicat Scientific
To verify the operation of flow equipment
Fluke
Field Metrology Wells;Industrial temperature loop calibrators;Lightweight, portable, and fast;
Rotronic
For calibration of humidity and temperature measuring instruments
Fluke
A large display and simple, pushbutton interface for ease of use.Simultaneous mA and % readout for quick, easy interpretation of readings.mA accuracy of 0.02%
Fluke
Best performance thermometers in their price rangeTwo Tweeners to choose from—reading PRTs or thermistorsBattery packs availableBest price/performance package
Fluke
Pressure comparator supplies the same pressure to both a reference gauge and device under test for calibration.Generates pressures to 20,000 psi (1400 bar);Operational with a wide range of fluids;Built-in hand pump...
Fluke
Test all the temperature sensors and transmitters;Easy to read dual display lets you view input and output simultaneously;Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters.
Fluke
Temperatures from –15 °C to 350 °C in one unitTwo wells in each block for simultaneous comparison calibrations
Fluke
Pressure comparator supplies same precisely controlled pressure to both a reference gauge and device under test for calibration.Dual pressure/vacuum capability;Bench mount design.
Fluke
Temperature calibration;Accurate, easy-to-use, single function RTD;Measure and simulate (13) different RTD types and resistance.