Ethernet converter PC-E

Serial to Ethernet communication;
DIN Rail/Panel Mount;
COM1: RS232/RS485, RJ45 for Ethernet connectivity;
Application: Connects IO modules, controllers, HMI with Ethernet Network.

Read moreShow less

What You Should Know about Protocol Converter

This type of Ethernet converter / Gateway is capable to link any serial (RS-232 or RS485) devices to your computer network via Ethernet for access control or remote control and monitoring purposes.

The Ethernet/Serial Converter enables serial devices, such as Modbus based IO modules communicating on RS232/485 to be connected to a 10/100 Base-TX Ethernet network. The Ethernet/Serial Converter can be configured to operate in a number of different modes depending on the application. It can be configured as a transparent data link or it can perform the gateway function of converting Modbus TCP messages to Modbus RTU messages.

The PC-E converters are factory programmed with a default IP address of This address must be changed before the converter is added to an existing Ethernet network. The IP address in the converter should be unique in the network and can be changed via the Web Server. Web server allows setting IP address, serial data format and operating modes. The web server can be accessed by most web browsers like Internet explorer, Netscape etc. PC-E supports FTP protocol which enables the web pages to be customized if required.


  • Serial to Ethernet communication
  • DIN Rail/Panel Mount
  • COM1: RS232/RS485, RJ45 for Ethernet connectivity
  • Application: Connects IO modules, controllers, HMI with Ethernet Network
  • Function: Transparent data link or Gateway to convert Modbus RTU to Modbus TCP messages
  • Support Multiple sockets enables up to 4 Masters to communicate with slaves connected to PC-E converter
  • Web server for Configuration


Power Supply 90mA @ 10VDC / 40mA @ 26VDC
Ethernet 10/100 Mbits, Connector RJ45
Serial RS232, 3 Wire, TX, RX & GND
RS485, 2 Wire Multi drop twisted pair
Baud Rate 2400, 4800, 9600, 19200, 38400, 57600, 115200
Communication Settings:
Data Bits: 5, 6, 7, 8
Parity None, Even, Odd
Stop Bits 1, 2.
Operating Temperature -10°C to + 50°C
Storage Temperature -40°C to + 85°C
Connectors Power and Communication: 8 way screw connector
Protection class IP20
Humidity Up to 95% non-condensing

Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.


Read moreShow less
Product Details
Contact us
14 other products in the same category:
Allows firmware updation into field devices;Compatible with Smar 302, 303 series, and DC302;- Powered by the computer;- Electrically isolated between the field device and the port EIA-232;- Easy and quick installation.
Handle manufacturing and process control applications;Ladder Logic language IEC 61131-3;A large function block library;Verifies consistency of the configuration ;
FIELDBUS to pneumatic signal converter;Low air consumption;  Stable output signal;Supply pressure: 18 to 100 psi;Vibrating resistant;PID Controller;Can be mounted in any position.
HART to Current Converter;Converts digital variable from HART communication in an analog current signal;Supports master or slave behavior.
Converter for PROFIBUS PA system to control valves, or other actuators;Digital technology used;Three outputs, reducing the cost per channel.



Contact Form

Create a free account to save loved items.

Sign in