Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
PM 1 (PRO) Dust Emissions Monitor & Leak Detector
Brand:
Single-point/basic functionality, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes.
Love0
PM 1 & PM 1 PRO Series
The PM 1 and PM 1 PRO are single-point/basic functionality dust particulate monitors, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes. Applications include filter leak detection, cyclone overflow and powder flow/no flow.
Principle of Operation
As particles flow near or around the electrically isolated sensing probe, a minute charge is continuously induced into the probe. This charge flows through a measurement circuit to ground. The induced charge signal is digitally analyzed and processed to provide an output that is reasonably linear to mass. The unit of measure is in picoamperes (pA).
Overview
PM 1
The PM 1 is the industry’s best value in a basic dust particulate monitors and leak/flow detectors. The engineering and quality greatly exceed comparably priced devices. The PM 1’s low cost justifies monitoring even small nuisance dust collectors.
The PM 1 is available in two versions:
PM 1-A
- Basic particulate monitor with alarm relay outputs
- Integral electronics only
PM 1-T
- Basic particulate 4/20mA transmitter
- Integral electronics only
PM 1- PRO
The PM 1 is also available in a PRO version for demanding process conditions and EPA compliance applications.
The PM 1-PRO is the benchmark for reliability and features when it comes to standard dust particulate monitors and leak/flow detectors. A state-of-the-art instrument, the PM 1 PRO is the first loop power particulate monitor with EPA certifiable self-tests and performance.
The PM 1 PRO is available in three versions:
PM 1 PRO-A
- Advanced, high-performance particulate monitor with alarm relay output
- Integral or remote electronics
- Graphical display/keypad
PM 1 PRO-AT
- Advanced, high-performance particulate monitor with alarm relay outputs and analog output
- Integral or remote electronics
- Graphical display/keypad
PM 1 PRO-T
- Advanced, high-performance particulate 4-20mA transmitter
- Integral or remote electronic
- Graphical display/keypad
Features
PM 1 Features:
▶ DynaCHARGE Technology - Superior reliability over other charge and tribo
▶ Digital Readout, Lockable Keypad - Simple text prompts (no trim pots or blind auto set)
▶ Convenient Loop Check and Alarm Functions - Speeds up and confirms installation
PM 1 PRO Features:
▶ Device Diagnostics (to NAMUR 107) - Help ensure installation, proper operation
▶ Automatic EPA Self-Tests - Adhere to regulations, also for critical process
▶ Performance and Design to EPA Standards - Meets ASTM D7392 and EN 15859
▶ Communication and Data Logging - HART, USB, and basic internal data logging
Specifications
|
Specifications |
PM 1 |
PM 1 PRO |
|
Power Supply |
2-Wire Loop |
2-Wire Loop or universal line |
|
Processor/Display |
Basic Monochrome |
Basic LCD |
|
Discrete Output |
Up to 2 SPST 5A @ 24 VAC |
Up to 2 SPST 5A @ 24 VAC |
|
Analog Output |
(1) 4/20mA Isolated |
(1) 4/20mA Isolated |
|
Analog & Discrete Outputs |
None |
None |
|
Ambient Temperature |
-13 F to 140 F (-25 C to 60 C) |
-40 F to 158 F (-40 C to 70 C) |
|
Process Temperature |
-13 F to 500 F (-25 C to 260 C) |
-40 F to 1598 F (-40 C to 870 C) |
|
Sensor Process Pressure |
50 PSI |
2,000 PSI |
|
Enclosure Rating * |
NEMA 4X |
NEMA 4X |
|
Hazardous Area Rating** |
Class II Div. II |
Class I Div. I |
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.
3 other products in the same category:
Fluke
Particle counter from Fluke to test and analyze indoor air quality
Babbitt International
Detect the flow of dust, granular or powered materials in a pneumatic conveying line or chute.
Fluke
Specifically designed for HVAC professionals for temperature and microamp measurements, the Fluke 116 digital multimeter has everything you need in an HVAC meter.