Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
Industrial Emissions Analyzer S9000-RACK
Brand:
Dedicated to continous measurement of industrial emissions. Ideal for research and development environments as well as process monitoring.
Love0
Continous measurement of industrial emissions. Thanks to its rack mounting, it is ideal for research and development environments as well as process monitoring.
- Serial communication port type RS485 according to protocol MODBUS® RTU USB Communication
- 4 .. 20 mA isolated output
- Output signal: from 4 to 20mA scalable up to 10% of the measurement range of the chosen sensor. Other calibrations beyond this limit on request
- 4 alarm relays outputs
- Heated probes available up to 20 ft (6m) connection
- Efficiency calculations
- Condensing efficiency calculation
- PCI efficiency calculation
- PCS efficiency calculation
- 15 default fuels
- 32 programmable fuels
- CO sensor protected by an automatic dilution system
- up to 6 gas sensors in total
- NDIR bench (measuring up to 3 gases)
- Electrochemical gas measurement sensors (up to 3)
- Stack temperature measurement (2 temperatures)
- Ambient or Primary Air Source Temperature
- Thermal Compensation
- Draft in the stack with automatic autozero
- Measurement of the differential pressure
- Stack Air Velocity measurement with the use of Pitot tube
- Suction pump flow rate measurement
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.
16 other products in the same category:
Brainchild
Build-in Laser Trim ASIC;Easy to change range;ON-OFFor time proportional selectable;Compact, only 86mm in depth.
Seitron
Analyzers dedicated to boiler smoke analysis. This analyzer is designed to help maximize combustion efficiency, for easily setting up, install and adequately maintain any residential and / or commercial boiler and...
Fluke
Tough polyprophylene case;Accessories and manual compartments;Detachable lid.
2B Technologies
Measurement based on UV absorption
Low maintenance
Low power consumption; can be battery operated
Internal data logger with real-time clock
2-s measurement interval
2B Technologies
Sensors in Air Quality Measurements
Low-cost sensors to measurements of air pollutants
Fluke
8 Pipe Clamp Temperature Probe;Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces;Durable ribbon sensor;Measurement range: -29 to 149 °C for pipe diameters from 6.4 to 34.9 mm;
Fluke
Three-Phase Power Quality Loggers give you fast, easy access to the data you need to make critical power quality and energy decisions in real-time.
Rotronic
for Heavy Industrial Applications with Through Wall Installations
Rotronic
The HygroPalm AW sets are the perfect solution for on-site measurements.
Rotronic
Installed in the enthronement to be monitored and fits directly on standard US surface-mounted boxes.
Fluke
Unattended monitoring, 99 data point memory, flashlight, 30 hour battery life, IP54 and 3 meter drop test