Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
DIFFERENTIAL PRESSURE SWITCHES-Flameproof-Titan Range
Brand:
- Titan range – ATEX/IECEx Exd IIB + H2 Gas certification.
- Stainless steel or black anodised aluminium housing.
Love0
Home Switches Differential Pressure
DIFFERENTIAL PRESSURE SWITCHES
Differential pressure switches for hydraulics, differential pressure switches for water, differential pressure switches for air, differential pressure switches for gases, differential pressure switches for chemicals, differential pressure switches for fuel oil, differential pressure switches for refrigerants (R134a and R407), whatever the medium we have a differential pressure switch to suit.
All of the differential pressure switch ranges have demonstrated their reliability for application at SIL 2 IEC 61508, with a qualifying report and Certificate Of Compliance available on request.
- ATEX & IECEx Flameproof (explosion proof) certification CE II2G Exd IIB+H2 T6 Ta -60 to +75°C, T5 Ta -60 to +90°C.
- Stainless steel or black anodised aluminium housing, IP66 rated.
- 1 x SPDT microswitch or 2 x SPDT microswitches (simultaneous operation).
- Integral terminal block via M20 electrical connection.
- Circuit monitoring resistors option.
- Proven and documented SIL 2 IEC 61508 suitability.
The Titan pressure, differential pressure, temperature, level and flow switches are designed for use in environments where explosive gases can be present (e.g. Gas fields, Oil rigs and Chemical plants etc.) and have been ATEX and IECEx certified as detailed overleaf. (SIL 2 - IEC61508 proven reliability).
These switches are manufactured from a high quality casting which offers robust construction and protection to IP66 for use within heavily polluted industrial and marine environments. A special feature of the instruments is the separation of the flameproof and adjustment compartments allowing for safe on-site adjustment of the set point with power on and the switch in operation.
Switch available:
- DPF266 Differential Pressure : 0.25 mBar to 8 Bar
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.
16 other products in the same category:
SMAR
Use of the Analog Input function;Easy firmware upgrade (via Flash Memory Interface);Easy update to FOUNDATIONTM fieldbus and HART® protocol.
Pyropress
Suitable for mounting through a tank top or cover
Certification ATEX CE Ex II1G EExia IIC T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C
Babbitt International
Heavy duty, maintenance free low pressure transmitter designed for fabric filters, cyclones, powder processes and low pressure particulate laden pipes.
SMAR
Available in 3 technologies: HART®(LD301), Foundation™ Fieldbus (LD302) and PROFIBUS PA (LD303).Configured with SMAR software and other manufacturer configuration tools.
Pyropress
Equipped with hermetically sealed reed contacts
Anderson Negele
Can withstand process and sterilization conditions of the Life Sciences industry:
One-piece stainless steel package.
Has a transducer and electronic circuitry.
Convert pressure and/or vacuum to a proportional...
Pyropress
Differential pressure sensitive element and switching mechanism
Pyropress
T6 Ta = -50 to +71°C, T5 Ta = -50 to +86°C, T4 = -50 to +100°C;
1 SPDT microswitch or 2 x SPDT microswitches to give DPDT switching operation;
316 Stainless steel construction to IP66 & IP67 standards.
Pyropress
For pressures between 0.25 mBar and 16 mBar
Pyropress
For pressures between 150 mBar and 40 Bar
Anderson Negele
Complies with all PMO, CFR and 3-A standardsSensor and range options for standard and high temp (UHT/Aseptic) applicationsDual 4-20mA retransmission standard
Pyropress
Equipped with hermetically sealed reed contacts
Pyropress
Black anodised aluminium housing sealed to IP66/IP67 standards
Pyropress
For sensing pressures between 100 mBar and 22 Bar
Pyropress
Constructed from 316 stainless steel
Pyropress
Incorporates orifice plate, differential pressure sensitive element