Pyropress
Argus Range - PPS Engineering polymer or 316 Stainless steel IP67 housing. Flying lead, M20, DIN plug or M12 electrical connection.
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Perseus Range - Robust black anodised aluminium housing to IP67
Pyropress
Argus Range - ATEX & IECEx Exia IIC Gas Certification. Stainless steel housing. Flying lead connection.
Pyropress
Perseus Range - ATEX/IECEx Exd IIC gas and dust certification. 316 Stainless steel or black anodised aluminium housing
Pyropress
Titan range – ATEX/IECEx Exd IIB + H2 Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Guardian Range - Stainless steel or black anodised aluminium IP66/67 case. Option of dual set point or adjustable deadband.
Pyropress
Titan Range - Robust Stainless steel or black anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Custom
Control
Panels
Certified Calibrations
Titan Range - Intrinsically Safe Differential Pressure Switches
Brand:
- Intrinsically safe certification ATEX/IECEx CE Ex II1G Exia IIC.
T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C.
Black anodised aluminium alloy or 316 stainless steel housing, IP66 rated.
Love0
- Intrinsically safe certification ATEX/IECEx CE Ex II1G Exia IIC
T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C.
Black anodised aluminium alloy or 316 stainless steel housing, IP66 rated. - 1 x SPDT microswitch or 2 x SPDT microswitches (simultaneous operation).
- Integral terminal block via M20 electrical entry.
- Proven and documented SIL 2 IEC 61508 suitability.
- Circuit monitoring resistors option.
Switches available:
DPF266 Differential pressure - 0.25 mBar to 8 Bar
This range has been used to monitor very small changes in vacuums and has been specified extensively for offshore applications. Incorporating a diaphragm and two sealing Belloframs the switch offers reliable switching action when a differential pressure is required to be sensed. They can, by venting either the HP or LP connection, be used as a low pressure or vacuum switch. Resistors can be incorporated for ‘end of line’ and short circuit monitoring.
Industrial Technical Services from Mississauga, Ontario is a single source Instrumentation and Automation company. We provide certified calibrations, PLC programming, custom controls and Panels.
16 other products in the same category:
Pyropress
ATEX & IECEx CEII1G Exia IIC T6 Ta = -50 to +78°C & T5 Ta = -50 to +93°C & T4 Ta = -50 to +128°C
Anderson Negele
For Applications in the Food, Beverage, and Dairy Industries.
Developed to address customer requirements for improved performance, safety, and readability of pressure indicators.
Pyropress
Titan Range - Robust Stainless steel or back anodised aluminium housing.
IP66 Environmental protection.
Nuclear approval specification.
Pyropress
Suitable for mounting through a tank top or cover
Pyropress
For pressures between 2 mBar and 8 Bar
Pyropress
Incorporates orifice plate, differential pressure sensitive element
Pyropress
For settings between -40°C and +250°C
Dwyer Instruments
Single pressure for air, compatible gas or liquid and provide 4-20 mA output signal.
Pyropress
Equipped with hermetically sealed reed contacts
Pyropress
Equipped with hermetically sealed reed contacts
Pyropress
For settings between -10°C and +250°C
Pyropress
Titan range – ATEX/IECEx Exia IIC Gas certification. Stainless steel or black anodised aluminium housing
Pyropress
Features a robust high quality housing with 1 or 2 sealed SPDT microswitche.
Designed for use in environments where explosive gases can be present.
Pyropress
For sensing pressures between 200 mBar and 22 Bar