Differential Pressure - LD400D and LD400H
Pressure is applied to high and low side and differential pressure is measured. High static pressure is supported for LD400H models.

Flow - LD400D and LD400H
The differential pressure is generated by a primary flow element and the square root function computes the flow measurement.

Absolute Pressure - LD400A
The pressure is measured at the high side of the transmitter and the low side is at zero absolute pressure to a sealed chamber with vacuum.

Gage Pressure - LD400M
The pressure is measured at the high side of the transmitter and the low side is open to the atmosphere, providing true local atmospheric reference.

Level - LD400L
The transmitter has a flange-mounted unit for direct installation on vessels. Extended diaphragms are also available. The closed tank low side can compensate for ullage pressure.

Sanitary - LD400S
LD400S is especially designed for food and other applications where sanitary connections are required. With threaded or "tri-clamp" connections, it allows quick and easy cleaning and maintenance.

The flush connection enables deposit removal without disconnecting the seal. Tri-clamp and other connections are compliant to 3A (74-02) standard for food grade applications.

SMAR Manifold Valves provide all of the necessary safety for field maintenance of LD400 HART Pressure Transmitters transmitters. Working at pressures of up to 6,000 psi, they are easy to handle and lighter than others in the market. Pressure and leakage tests are present in 100% of the valves, also for models mounted on the transmitter.

SR301 is a remote seal designed for chemical and thermal isolation. LD400 HART Pressure Transmitters can be assembled with separate diaphragm seals in either one or both sides of the sensor. SR301 options include: flanged "T", flush connection, threaded, sanitary and flanged with extension.

Typical applications for LD400 HART Pressure Transmitters with remote seals:

• Corrosive process fluid
• Suspended solids or viscous process fluid
• Process fluids that may freeze or solidify
• Process temperatures higher than supported by transmitters
• Replaces impulse lines and condensate legs
• Bubble system

LD400 is available in HART technology.
These instruments can be configured with SMAR software and other manufacturer configuration tools.

Local adjustment is available in all LD400 HART Pressure Transmitters. It is possible to configure zero and span, totalization, setpoint and other control functions using the magnetic screwdriver.

SMAR has developed AssetView, which is a user-friendly Web Tool that can be accessed anywhere and anytime using an internet browser. It is designed for management and diagnostics of field devices, to ensure reactive, preventive, predictive and proactive maintenance.

LD400 HART Pressure Transmitters can be configured by:

• SMAR CONF401 for Windows and UNIX;
• SMAR DDCON100 for Windows and UNIX;
• SMAR HPC401 for most recent models of Palms;
• Other manufacturers' configuration tools based on DD (Device Description), Simatic PDM, and FDT/DTM, such as AMS^TM, FieldCare^TM, PACTware^TM, HHT275 and HHT375, PRM Device Viewer.