BetaLOG HART Software

BetaLOG HART software gives you the capability of getting information out of the LC-110H

Read moreShow less

How about the ability to data log or record data on a loop or a particular transmitter?

The BetaLOG HART software gives you the capability of getting information out of the LC-110H. Configurations can be stored a .csv or .txt files. This allows you to document an entire plant for HART devices without spending thousands of dollars for plant asset management software. The data log tool features selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the LC-110H measure, all four process variables, and the standard status conditions.

General Features

  • Configuration data for up to 30 tags
  • Data logging capacity is 9800 records or 99 individual sessions
  • Selectable logging interval (1, 2, 5, 10, 30, or 60 seconds)
  • Record both the analog and digital signal (side by side)
  • Records free indication
  • Logging is stopped before LC-110H is turned when battery low voltage is detected (5.6V)
  • Battery voltage is displayed on the LCD so user can determine whether to change batteries
Read moreShow less
Product Details
Contact us
16 other products in the same category:
Maintain and operate a FIELDBUS based system through a PC. Powerful and user friendly software tool;The WINDOWS™ graphic user interface;Easy to use;No previous knowledge of computers is required.
Turns PC or laptop into a universal HART device configuration platform;Includes all software and hardware needed;Based on Device Description (DD) technology;Intuitive, easy to use graphical interface.
Captures messages from any fieldbus bus (ISP, FF, HSE and Profibus PA);Messages sent to the printer and/or saved to files;Decodes FF messages.
Generate information Table to the LC700 OPC Server;Telling which are the Tags for each Modbus Address; Operating System- Windows;- Computer -PC –Pentium Processor 400 MHz or higher.- RAM- 64 Mbytes- Disk Space - 10...
Turns computer to platform for HART devices.Compatible: Microsoft Windows ‘95, ‘98, 2000 and XP; Microsoft NT, and UNIX;Support HART instruments;Supports Multidrop operations;One step installation;
HMI and SCADA modular solutions suite;Single development tool for multiple purposes;OPC-To-The-Core™ Technology;Web-based visualization;Alarm notification and OPC multimedia alerts.
OLE for Process Control Client Application (OPC Client);Validate a Fieldbus Configuration;Software monitors the Function Blocks;Application runs on a personal computer.
Windows based configurator;Define hardware, create control logic (Ladder Logic language);Can create UserFunctions and test the application.
Software interface used to communicate between the Fieldbus communication stack software and higher-level host application software.
Perform Firmware Download of any Smar FOUNDATION fieldbus and PROFIBUS equipment;Utility software;Allows upgrading the firmware.
Advanced graphic interface;Editing, calibration, optimization and online monitoring tools;Documentation printing capability;Network parameter setting for serial (RS-485) or Ethernet.



Contact Form

Create a free account to save loved items.

Sign in