RC2 Remote Control

RC2 Remote Control can be used for control or adjustment of the zeropoint and sensitivity when testing the transmitter

Read moreShow less

The RC2 Remote Control connects to a GfG 28 series transmitter by a connection cable and is used for operating the transmitter or as a display. When connected to the transmitter it provides a display and the keypad, the readout and the keypad functions of the remote control are identical with those of the transmitter.

The RC2 can be used for control or adjustment of the zeropoint and sensitivity when testing the transmitter. It is approved for use in explosive areas. Do not replace the battery of the remote control in a potentially explosive area. Maximum cable length is 10m / 33 feet.


  • Remote Control for 28 series transmitters
  • Provides a display and a keypad
  • Approved for use in explosive areas
  • Controls/adjusts zero point and sensitivity
  • ATEX certified 
Read moreShow less
Product Details
Contact us
16 other products in the same category:
Aqua Metrix
Non-contact ultrasonic level measurement. Narrow 8 degree beam angle. Outputs 0-20 mA and RS-485. Plug-and-play setup. No calibration. Intuitive software included. Software control of analog range, span and...
Babbitt International
Side mounted 2 Wire Loop power transmitters provide a 4/20mA output signal that can be sent to a digital display, PLC or DCS. These transmitters are available in several different models.
Aqua Metrix
Multi-Parameter Transmitter. pH, ORP, Conductivity  & Flow parameters available. 24 VDC / 24 VDC Loop. Easy to read 2 X 16 character LCD display. Quick and easy to calibrate. Single 4-20mA output



Contact Form

Create a free account to save loved items.

Sign in