New Product
Ozone (Ambient) / Chemical & Petrochemical / Pharma / Water & Waste Water
Model 205 Dual Beam Ozone Monitor High
Ozone (Industrial) / Chemical & Petrochemical / Pharma / Water & Waste Water
106-MH Ozone MonitorTM (Industrial)
Ozone (Industrial) / Automotive & Manufacturing / Chemical & Petrochemical / Dairy / Food & Beverage / Lab & Gas / Pharma / Plastics / Power & Steam
106-HIndustrial Ozone MonitorTM
Test & Measurement
Instruments
HC2-HK25/HC2-HK40 Handheld Probe
Features
- Range of measurement: -100â¦200 °C / 0â¦100 %RH
- Digital interface (UART) and scalable analog outputs, 0â¦1 V
- Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
- Adjusted at 23 °C and 10, 35, 80 %RH
This handheld probe is especially suitable for mobile measurements of humidity in high temperatures. It measures humidity and temperature and calculates the dew/frost point.
Features
- Range of measurement: -100â¦200 °C / 0â¦100 %RH
- Digital interface (UART) and scalable analog outputs, 0â¦1 V
- Standard output scaling: 0â¦1 V = -40â¦60 °C / 0â¦100 %RH
- Adjusted at 23 °C and 10, 35, 80 %RH
Specifications & Spare Parts
| Probe type | High-Temperature Handheld Probe |
| Dimensions | Ø15 x 25mm / Ø15 x 400mm |
| Weight | 210g / 240g |
| Operating range electronics | -40…100 °C / 0…100 %RH |
| Accuracy at 23 ±5 °C | ±0.8 %RH / ±0.1 K |
| Accuracy w. adjustment profile “standard” | at 23 °C / 10, 35, 80%RH ± 0.8%RH / ± 0.1 K |
| Measuring range | -100…200 °C (short-term peak load) / 0…100%RH |
| Power supply / Power consumption | 3.2…5 VDC, Calibrated @ 3.3 VDC / ~4.5 mA |
| Long-term sensor stability | <1 %RH / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Probe protection | Filter carrier, brass nickelplated |
| Filter cartridge | Wire mesh, 20…25 um |
| Response time t 63 | 20 m/s, with filter |
| Psychrometric calculations | <0.02 %RH / 0.01 K |
| Exploitation software | ROTRONIC HW4.2 |
| Probe adjustment by software | 1 Point & multipoint %RH & °C |
| Firmware update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Device Protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analog outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Max. cable length service cable | 2m |
| Probe material | PEEK |
| Enclosure material | POM handle / sensor tube: PPS, black |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
