New Product
Ozone (Ambient) / Chemical & Petrochemical / Pharma / Water & Waste Water
Model 205 Dual Beam Ozone Monitor High
Ozone (Industrial) / Chemical & Petrochemical / Pharma / Water & Waste Water
106-MH Ozone MonitorTM (Industrial)
Ozone (Industrial) / Automotive & Manufacturing / Chemical & Petrochemical / Dairy / Food & Beverage / Lab & Gas / Pharma / Plastics / Power & Steam
106-HIndustrial Ozone MonitorTM
Test & Measurement
Instruments
InPro 7250HT Peek Conductivity Sensor
Features
- Suitable for a wide range of applications
- Highest measurement accuracy
- Advanced and Premium Line”transmitters
Downloads
For medium and high conductivity measurements in hazardous areas.
The InPro 7250HT electrodeless sensor made of PEEK is highly resistant to aggressive chemicals and suitable for applications in hazardous areas. The sensors wide temperature range from -20 to 180°C (-4…356 °F) and its technical specifications allow the sensor to be used for the majority of all electrodeless conductivity applications. Typical applications can be found in the chemical process and pulp & paper industries. A variety of available process adapters allow simple installation into almost every type of process.
Features and Benefits
| Suitable for a wide range of applications |
| Made of chemically resistant PEEK (polyetheretherketone), this sensor shows no polarization, is insensitive to contamination, fouling or film formation on the sensor surface, extreme robust, easy to install, has a wide temperature range and approval for usage in hazardous areas. |
| Highest measurement accuracy |
| With a resolution of 1 μS/cm, a large dynamic range and an excellent linearity the InPro 7250 HT is the perfect choice also for applications at low conductivity values under harsh conditions. |
| Compatible with METTLER TOLEDO’s “Advanced and Premium Line”transmitters |
| METTLER TOLEDO transmitters offer a variety of advantages and benefits providing highest reliability, easy operation and advanced diagnostics. Amongst others, advanced software allows concentrations of a wide range of acids and caustic solutions to be displayed. |
Specifications & Spare Parts
| Cell factor | 2.175 |
| Accuracy | ± (0.5 % of measured value + 1 μS) |
| Measurement range | 0…2000 mS/cm |
| Temperature range | -20 to 180 °C (-4 to 356 °F) |
| Max. pressure (bar) | 20 bar |
| Max. pressure (psi) | 290 psi |
| Sensor material | PEEK, glass-fiber reinforced (GF30) |
| O-rings, insulation | Viton® |
| Temperature sensor | Pt1000 |
| FM approval | IS/I, II, III/1/ABCDEFG/T6 |
| ATEX Certification |  II 1/2G Ex ia IIC T6/T5/T4/T3 Ga/Gb |
| IECEx Certificate of Conformity | Ex ia IIC T6/T5/T4/T3 Ga/Gb |
| Application | Chemical processes with higher temperature requirements |
| Certification | ATEX/FM |
| Material Number(s) | 52 002 739 (3m cable length) |
