New Product
Ozone (Ambient) / Chemical & Petrochemical / Pharma / Water & Waste Water
Model 205 Dual Beam Ozone Monitor High
Ozone (Industrial) / Chemical & Petrochemical / Pharma / Water & Waste Water
106-MH Ozone MonitorTM (Industrial)
Ozone (Industrial) / Automotive & Manufacturing / Chemical & Petrochemical / Dairy / Food & Beverage / Lab & Gas / Pharma / Plastics / Power & Steam
106-HIndustrial Ozone MonitorTM
Test & Measurement
Instruments
PD6300 ProVu Pulse Input Flow Rate/Totalizer
The PD6300 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from a pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeter. It displays that signal on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. Flow rate is typically displayed on the upper line and the cumulative total is displayed on the lower line. The total overflow feature allows up to a 9-digit total and grand total to be displayed. Like all ProVu meters, the PD6300 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6300 includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.
Features
|
Specifications & Spare Parts
General
| Display | Upper display: 0.60″ (15 mm) high. Lower display: 0.46″ (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs. |
| Display Intensity | Eight user selectable intensity levels |
| Display Update Rate | 5/second (200 ms) |
| Overrange | Display flashes 999999 |
| Underrange | Display flashes -99999 |
| Display Assignment | The upper and lower displays may be assigned to rate, total, grand total, alternate (rate/total, rate/grand total, etc.), and more. |
| Front Panel | NEMA 4X, IP65 |
| Programming Methods | Four front panel buttons, digital inputs, PC and MeterView Pro software, Modbus registers |
| F4 Digital Input Contacts | 3.3 VDC on contact. Connect normally open contacts across F4 to COM. |
| F4 Digital Input Logic Levels | Logic High: 3 to 5 VDC, Logic Low: 0 to 1.25 VDC |
| Noise Filter | Programmable from 2 to 199 (0 will disable filter) |
| Recalibration | All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months. |
| Max/Min Display | Max (Peak) / min (Valley) readings are stored until reset or power cycled. |
| Password | Three programmable passwords restrict modification of settings; two prevent resetting the totals. |
| Non-Volatile Memory | All settings stored in non-volatile memory for a minimum of 10 years if power is lost. |
| Power Options | 85-265 VAC 50/60 Hz, 90-265 VDC, 12-24 VDC, USB power for configuration only. |
| Fuse | UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse. |
| Isolated Transmitter Power Supply | 24 VDC ± 10%, 200 mA max for 85-265 VAC models, 100 mA max for 12-24 VDC models. |
| Normal Rejection Mode | Greater than 60 dB at 50/60 Hz |
| Isolation | 4 kV input/output-to-power line. 500 V input-to-output or output-to-P+ supply. |
| Operating Temperature | -40 to 65°C |
| Humidity | 0 to 90% RH, non-condensing |
| Connections | Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters. |
| Dimensions | 4.68″ x 2.45″ x 5.64″ (119 mm x 62 mm x 143 mm) (W x H x D) |
| Weight | 9.5 oz (269 g) |
| UL File Number | UL & c-UL Listed. E160849; 508 Industrial Control Equipment. |
| Warranty | 3 years parts & labor |
| USB Connection | USB 2.0 Standard, Micro-B receptacle |
