Applications
Industries
Manufacturers
New Product
2b-technologies-Model-205-Dual-Beam-Ozone-Monitor
Ozone (Ambient) / Chemical & Petrochemical / Pharma / Water & Waste Water
Model 205
Dual Beam Ozone Monitor High
2b tech Model 106-MH Ozone Monitor
Ozone (Industrial) / Chemical & Petrochemical / Pharma / Water & Waste Water
106-MH Ozone MonitorTM (Industrial)
1/8 DIN Process Temperature Controller
Plastics
1/8 DIN Process Temperature Controller
2B Model 106-H Ozone Monitor
Ozone (Industrial) / Automotive & Manufacturing / Chemical & Petrochemical / Dairy / Food & Beverage / Lab & Gas / Pharma / Plastics / Power & Steam
106-H
Industrial Ozone MonitorTM

PD6310-WM ProVu weights & Measures Approved Batch Controller

Get a quote

Related Products

The ProVu PD6310-WM is an NTEP® certified, pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications which has been certified as a Weighing and Measuring device. These versatile NTEP certified batch controllers provide excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. This Weights and Measures approved batch controller is equipped with a mechanically secured, tamper-proof, programming lockout feature. This consists of a cable with a compression seal that is used to prevent access to a programming lockout jumper. Like all ProVu meters, the PD6310 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

Features

  • Pulse, Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), Square Wave Inputs
  • Dual-Line 6-Digit Display, 0.60″ & 0.46″ Height
  • SunBright Sunlight Readable Display
  • Universal 85-265 VAC or 12/24 VDC Input Power
  • 5, 10, or 24 VDC Flowmeter Power Supply
  • 2 or 4 Relays + Isolated 4-20 mA Output Options
  • Program and Control with a Computer Using MeterViewPro Software
  • Modbus® RTU Communication Protocol Standard
  • K-Factor, Internal Scaling or External Calibration
  • Single or Multi-Stage Batch Control(Up to 8 Relays)
  • Automatic or Manual Batch Control
  • Start / Pause / Stop, Change Batch with Front Panel Buttons
  • Automatic Overrun Correction
  • Count Up or Down with Each Batch
  • Display Batch Total, Rate, Grand Total, Count or Preset
  • Rate in Units per Second, Minute, Hour, or Day
  • 9-Digit Grand Total with Overflow Feature
  • Low or High Flow Alarms while Batching
  • Standard 1/8 DIN Mounting
  • NEMA 4X, IP65 Front
  • Onboard USB and MeterView® Pro Programming Software

Specifications & Spare Parts

General Specifications
Display Upper display: 0.60″ (15 mm), Lower display: 0.46″ (12 mm), Both are 6 digits (-99999 to 999999), red LEDs, lead zero blanking.
Default Display Assignment Upper: batch total, Lower: rate with alternating units; can be switched to show grand total, batch count, or preset with the STOP key.
Custom Display Assignment Rate, total, grand total, batch count, preset, set points, units (lower display only), alternating R & T, alternating R & GT, preset & rate, max & min, or Modbus display register.
Alternating Display Displays alternate every 10 seconds when the display is selected or the batch is paused.
Display Intensity Eight user-selectable intensity levels.
Display Update Rate 5 times per second (200 ms).
Overrange/Underrange Overrange: Display flashes 999999, Underrange: Display flashes -99999.
Front Panel NEMA 4X, IP65 rated.
Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max, or 12-24 VDC ± 10%, 15 W max. Powered over USB for configuration only.
Fuse UL Recognized, 5 A max, slow blow; up to 6 batch controllers may share one 5 A fuse.
Isolation 4 kV input/output-to-power line; 500 V input-to-output or output-to-P+ supply.
Environmental Operating temp: -40 to 65°C; Storage temp: -40 to 85°C; Humidity: 0 to 90% non-condensing.
Connections Removable screw terminal blocks (12 to 22 AWG), RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure 1/8 DIN, high impact plastic, UL 94V-0, color: black.
Dimensions 4.68″ x 2.45″ x 5.64″ (119 mm x 62 mm x 143 mm) (W x H x D).
Weight 9.5 oz. (269 g).

Pulse Input
Inputs Pulse or square wave 0-5 V, 0-12 V, or 0-24 V @ 30 kHz; TTL; open collector 4.7 kΩ pull-up to 5 V @ 30 kHz; NPN or PNP transistor, switch contact 4.7 kΩ pull-up to 5 V @ 40 Hz; coil (sine wave) 40 mVp-p min @ 10 kHz; Modbus PV (Slave).
Low Voltage Mag Pickup (Isolated) Sensitivity: 40 mVp-p to 8 Vp-p.
Minimum Input Frequency 0.001 Hz – Minimum frequency is dependent on high gate setting.
Maximum Input Frequency 30,000 Hz (10,000 for Low Voltage Mag Pickup).
Accuracy ±0.03% of calibrated span ±1 count.
K-Factor Field programmable K-factor converts input pulses to rate in engineering units (0.00001 to 999,999 pulses/unit).

Batch Controller
Rate Display Indication 0 to 999999, lead zero blanking. “R” LED illuminates while displaying rate.
Total Displays & Grand Total Overflow 0 to 999,999; automatic lead zero blanking. “T” LED for batch total, “GT” for grand total. Overflow feature available for grand total.
Batch Preset 0.00001 to 999,999 based on batch total decimal point.
Automatic Batch Restart Delay 00000.1 to 999.9 seconds.
Grand Total Alarms Up to seven, user-selectable under Setup menu. Any set point can be assigned to grand total for alarm indication.

Relays
Rating 2 or 4 SPDT (Form C) internal and/or 4 SPST (Form A) external; rated 3 A @ 30 VDC and 125/250 VAC resistive load; 1/14 HP (≈ 50 W) @ 125/250 VAC for inductive loads.
Preclose 0-100% of batch size, individually programmable for each additional batch control relay beyond the first.

Isolated 4-20 mA Transmitter Output
Output Source Rate/process, total, grand total, max, min, set points 1-8, Modbus input.
Scaling Range 1.000 to 23.000 mA for any display range.
Accuracy ±0.1% FS ±0.004 mA.
Output Loop Resistance 24 VDC: 10Ω min, 700Ω max; 35 VDC external: 100Ω min, 1200Ω max.

Serial Communications
Protocol Modbus® RTU.
Baud Rate 300 – 19,200 bps.
Data 8 bit (1 start bit, 1 or 2 stop bits).

Digital I/O Expansion Module
Channels 4 digital inputs & 4 digital outputs per module.
System Up to 2 modules for a total of 8 inputs & 8 outputs.

4-Relay Expansion Module
Relays Four Form A (SPST) rated 3 A @ 30 VDC and 125/250 VAC resistive load; 1/14 HP (. 50 watts) @ 125/250 VAC for inductive loads.

NTEP® Weights and Measures Certification
Certificate Number 14-061.
Definition Register for Meter. Stationary Wholesale Liquid Register/Batch Controller Digital Electronic Model: PD63XX Series and PD8-63XX Series.
Evaluation Criteria NIST Handbook 44, 2014 Edition; NCWM Publication 14, 2014 Edition; National Conference on Weights and Measures (NCWM) National Type Evaluation Program (NTEP) Certificate of Conformance.
PD6310 ProVu Pulse Input Batch Controller
PD6310 ProVu Pulse Input Batch Controller